请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
ICA-AO-I/U-IO-V1
| 產品描述 |
| IO-Link converter with analog output (current/voltage) |
| General specifications |
| UL File Number | E223772 |
| Functional safety related parameters |
| MTTFd | 246 a |
| Indicators/operating means |
| LED 1 | Device status, diagnostics |
| LED 2 | IO-Link status |
| Electrical specifications |
| Rated operating voltage | 18 ... 30 V |
| Nominal voltage | 24 V DC |
| Nominal current | 230 mA |
| Current consumption | typ. 30 mA |
| Surge protection | Category II |
| Interface |
| Interface type | IO-Link |
| IO-Link revision | 1.1 |
| Device ID | 0x0F0502 (984322) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 2.3 ms |
| Process data width | 16 bits / 2 bytes |
| SIO mode support | no |
| Compatible master port type | A, B |
| Output |
| Number/Type | 1 analog output for actuators with analog input |
| Resolution | ADC: 24 bit
Process data: 16 bit |
| Accuracy | 0.1 % FS at 25 °C |
| Measurement range | Current output or voltage output, configurable:
0 mA…20 mA
4 mA…20 mA
0 V…10 V
-10 V…10 V |
| Sensor supply | 17 … 29.8 V DC
≤ 200 mA |
| Output filter | Average determination of process data, parameterizable |
| Temperature influence | 45 ppm/°K |
| Sampling rate | max. 200 Hz |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 |
| Standard conformity |
| Degree of protection | EN 60529:2000 |
| Fieldbus standard | IEC 61131-9 / IO-Link V1.1 |
| Emitted interference | EN 61000-6-4 |
| Noise immunity | EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6 |
| Shock resistance | EN 60068, Part 2-6, Part 2-27 |
| Ambient conditions |
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity | max. 85 % |
| Climatic conditions | Climatic class 3K3 |
| Altitude | 0 ... 2000 m |
| Shock and impact resistance | 50 g, 11 ms, all axes |
| Pollution degree | 3 |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | IO-Link M12, A-coded
Input M12, A-coded |
| Material | |
| Contacts | Zinc, CuNi plated |
| Housing | Plastic PC + PBT |
| Mass | 44 g |
| Dimensions | |
| Height | 32.3 mm |
| Width | 15 mm |
| Length | 77.2 mm |
| Construction type | Field housing |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27242601 |
| ECLASS 12.0 | 27242601 |
| ECLASS 11.0 | 27242601 |
| ECLASS 10.0.1 | 27242601 |
| ECLASS 9.0 | 27242601 |
| ECLASS 8.0 | 27242601 |
| ECLASS 5.1 | 27242601 |
| ETIM 9.0 | EC001597 |
| ETIM 8.0 | EC001597 |
| ETIM 7.0 | EC001597 |
| ETIM 6.0 | EC001597 |
| ETIM 5.0 | EC001597 |
| UNSPSC 12.1 | 32151705 |
Details:
ICA-AO-I/U-IO-V1
Product Documentation:
ICA-AO-I/U-IO-V1
Design / Simulation:
ICA-AO-I/U-IO-V1
Approvals:
ICA-AO-I/U-IO-V1
Software:
ICA-AO-I/U-IO-V1
相關產品:
ICA-AO-I/U-IO-V1
| Accessory of |
|
|
|
| PROFINET and Modbus IO-Link master with 4 x IO-Link Class A and 4 x IO-Link Class B portsfa |
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa |
|
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa |
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
| Ethernet IO-Link master with PROFINET S2 redundancyfa |
|
|
|
|
| Ethernet IO-Link module with eight IO-Link portsfa |
|
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputsfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
|
| EtherNet/IP and Modbus IO-Link master with 4 x IO-Link Class A and 4 x IO-Link Class B portsfa |
|
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
|
| Firmware variant from ICE3-8IOL-G65L-V1D with Modbus enabled by defaultfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputsfa |
|
| Accessories |
|
|
|
| torque screwdriver (0.6 Nm)fa |
|
|
|
|
| plug-in cap M12fa |
|
|
|
|
| IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa |
|
+886 2 27227708