工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

HART Termination Board HiS1132/CON8-H-LTX-02

HiS1132/CON8-H-LTX-02
  • APACS/QUADLOG replacement FTA
  • Bailey Infi 90 replacement FTA
  • Product connector; PCS wiring
  • Easy switch selectable configurations for AO and AI

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要:的技術資料  HiS1132/CON8-H-LTX-02

Supply
Rated voltage20 ... 30 V DC
Fusing3.15 A , 5 x 20 mm (0.2 x 0.8 inch)
Power dissipation0.7 W , with Multiplexer
Reverse polarity protectionyes
HART signal channels (intrinsically safe)
HART signal channels
Number of channels32 unbalanced signal loops
Redundancy
Supplyyes
Galvanic isolation
HART signal channels30 V DC
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Relative humidity5 ... 90 %, non-condensing
Mechanical specifications
Core cross section2.5 mm2 (16 AWG)
Connectionfield side: fixed screw terminals
control side: PCS-specified connector
RS 485 interface: removable screw terminals
power: removable screw terminals
Massapprox. 700 g
Dimensions333 x 125 x 208 mm (13.1 x 4.9 x 8.2 inch) (W x H x D) , depth including module assembly with HiDMux2700
Height125 mm
Width333 mm
Depth208 mm
MountingDIN rail mounting
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027210190
ECLASS 12.027210190
ECLASS 11.027210190
ECLASS 10.0.127210190
ECLASS 9.027210190
ECLASS 8.027210190
ECLASS 5.127242690
ETIM 9.0EC001485
ETIM 8.0EC001485
ETIM 7.0EC001485
ETIM 6.0EC001485
ETIM 5.0EC001485
UNSPSC 12.139121008

Details: HiS1132/CON8-H-LTX-02

Product Documentation: HiS1132/CON8-H-LTX-02

Language Selection:
Manuals語言檔案類型檔案尺寸
Manual DTM description HiDMux2700ENGPDF2278 KB
Manual HiDMux2700ENGPDF8581 KB

相關產品: HiS1132/CON8-H-LTX-02

Accessory of
32-channel, 24 V DC supply, HART field device input (revision 5 to 7), RS-485 interface, Up to SIL 3 acc. to IEC/EN 61508pa