请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
KW-6/6 24mm
Ambient conditions |
Operating temperature | -30 ... 150 °C (-22 ... 302 °F) |
Mechanical specifications |
Shaft diameter | d1 = 6 mm , d2 = 6 mm |
Material | anodized aluminum |
Mass | 35 g |
Rotational speed | max. 8000 min -1 |
Max. torque | 1 Nm |
Radial offset | max. ± 0.3 mm |
Axial offset | max. ± 0.5 mm |
Angle error | max. ± 4 ° |
Torsion spring stiffness | 18 Nm / rad |
Radial spring stiffness | 50 N / mm |
Moment of inertia | 30 kg m2 x 10-7 |
Mounting | clamp screws M4 x 6, DIN 916 |
Tightening torque of clamping screws | max. 1.2 Nm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270592 |
ECLASS 12.0 | 27270592 |
ECLASS 11.0 | 27270592 |
ECLASS 10.0.1 | 27270592 |
ECLASS 9.0 | 27270592 |
ECLASS 8.0 | 27279103 |
ECLASS 5.1 | 27270591 |
ETIM 9.0 | EC003015 |
ETIM 8.0 | EC003015 |
ETIM 7.0 | EC003015 |
ETIM 6.0 | EC003015 |
ETIM 5.0 | EC003015 |
UNSPSC 12.1 | 23153016 |
Details:
KW-6/6 24mm
相關產品:
KW-6/6 24mm
Accessory of |
|
|
|
Sturdy and compact design, Up to 2500 ppr, Rectangular design, 10 V ... 30 V with short-circuit proof push-pull output, Enclosure type: Rectangular type, Type of shaft: Solid shaft, Interface: push-pull, incremental, Output type: push-pull, incrementalfa |
|
|
|
|
Industrial standard housing ∅58 mm, Up to 5000 ppr, Servo flange, square flange or clamping flange, Special flanges with special shafts on demand, Stainless steel version, Enclosure type: 58 mm, Type of shaft: Solid shaft, Interface: push-pull, incremental, Output type: push-pull, incrementalfa |
|
|
|
|
Solid shaft, 30 Bit multiturn, Free of wear magnetic sampling, High resolution and accuracy, Mechanical compatibility with all major encoders with fieldbus interface, Enclosure type: 58 mm, Type of shaft: Solid shaft, Interface: PROFINET, Detection type: magnetic sampling, Interface type: PROFINET IOfa |
|
|
|
|
Industrial standard housing ∅58 mm, PROFIBUS interface, 25-bit multiturn, Speed transfer, Extended scaling functions, Enclosure type: 58 mm, Type of shaft: Solid shaft, Interface: PROFIBUS, Detection type: photoelectric samplingfa |
|