工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

Sensor module, interface DoorScan-I

DoorScan-I
  • Sensor module for configurable DoorScan® presence sensor
  • Multi-function interface with full operation
  • Complete system supply for the entire system for one door
  • Can also be used to supply the emitter and receiver modules with power
  • Single button commissioning with automatic Teach-in function
  • SIL 2, certified in accordance with DIN 18650/EN 16005
  • Tool-free module mounting using snap-in mechanism
  • Switchable NPN or PNP outputs

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要:的技術資料  DoorScan-I

產品描述
Replacement/extension sensor module for installation in the DoorScan® and TopScan sensor profile, multifunction interface module
General specifications
Operating modeBackground evaluation
Functional safety related parameters
Safety Integrity Level (SIL)SIL 2
Performance level (PL)PL d
CategoryCat. 2
MTTFd2716 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Function indicatorInterface: Red LED: detection, excess gain, fault code
Yellow LED: teach status
Green LED: blank status
Green LED: DIP switch status
Electrical specifications
Operating voltage24 V DC +/- 20 %
No-load supply current30 mA
Input
Test inputhigh level ≥ 15 V low level ≤ 2 V
Control inputStandby active at U = 11 V DC at 30 V DC
Output
Switching typelight-on
Signal outputswitchable NPN or PNP , short-circuit protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Response time≤ 52 ms
≤ 200 ms in boost operating mode
Conformity
Functional safetyISO 13849-1 ; EN 61508 part1-4
Product standardEN 12978
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F)
Mechanical specifications
Mounting heightmax. 3500 mm
Degree of protectionIP54 (when mounted)
Connectionplug strip , 6-pin
Massapprox. 30 g
Dimensions
Height24 mm
Depth31 mm
Length126 mm

Classifications

SystemClasscode
ECLASS 13.027270913
ECLASS 12.027270913
ECLASS 11.027270913
ECLASS 10.0.127270913
ECLASS 9.027270913
ECLASS 8.027270913
ECLASS 5.127270903
ETIM 9.0EC002550
ETIM 8.0EC002550
ETIM 7.0EC002550
ETIM 6.0EC002550
ETIM 5.0EC001821
UNSPSC 12.139121528

Details: DoorScan-I

Informative Literature: DoorScan-I

Language Selection:
Literature語言檔案類型檔案尺寸
Product Information - DoorScan®ENGPDF1086 KB

Product Documentation: DoorScan-I

Language Selection:
Manuals語言檔案類型檔案尺寸
ManualENGPDF2756 KB

Design / Simulation: DoorScan-I

Language Selection:
CAD語言檔案類型檔案尺寸
CAD Portal / CAD PortalALLLINK---
CAD-files 3-D / CAD-Dateien 3-DALLSTP15786 KB

Approvals: DoorScan-I

Language Selection:
Certificates證書號碼語言檔案類型檔案尺寸
EU TUV Nord EC-Type Exam. Certificate Functional Safety44 205 13 095719ALLPDF89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0115FALLPDF480 KB

相關產品: DoorScan-I

Accessories
Connecting cable between hinge side and leading edge side, Connection to interface module, Operating voltage: max. 300 V, Connection: 2 x plug-in terminalfa
Door transition cable to connect the sensor to the controller, Connection to interface module, Operating voltage: max. 300 V, Connection: screw terminal , 6-pinfa
Connecting cable for sensor modules, Serves as the internal bus connection for module communication, Ribbon cable, Up to 5 sensor modules can be connected, Operating voltage: max. 50 V, Connection: 5 x plug-in terminal, 8-pinfa
Cable adapter for configurable DoorScan presence sensor, Adapter for connecting cables (e.g., to glass doors, existing cables), Tool-free module mounting using snap-in mechanism, Connection: plug strip 6-pin , socket 8-pin , solder pins 8-pinfa
Cable adapter for configurable DoorScan presence sensor, Cable adapter for extending the ribbon cable, Tool-free module mounting using snap-in mechanism, Connection: socket 8-pinfa
倍加福的功能安全模組

提供數百種產品以及產品的 SIL/PL 評估、免費工具和手冊:「功能安全模組」,是您實施安全功能的起點。