Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

HART Termination Board FI-PFH-NS0137-R

  • Connection board for K-System HART Multiplexer
  • 16-channel
  • Interface for series connection or parallel connection
  • Integrated, switchable 220 Ω resistor
  • Connection via screw terminals
 Please contact the Serviceline for exact delivery estimation
700.00 USD
Netlist price. Your individual price will be calculated during checkout.
Unit Price 


Free Shipping

Purchase on Account

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  FI-PFH-NS0137-R

HART signal channels (non-intrinsically safe)
Load resistor220 Ω , switchable on
Typemultiplexer connection : IDC plug, 26-pin
Signal lines
Rated currentmax. 30 mA per channel
Control elementsDIP switch
DIP switchselection of operating mode:
- ON: without load resistor
- OFF: with load resistor
Factory settingDIP switches S1 and S2: ON
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Electromagnetic compatibilityNE 21:2017
For further information see system description.
Degree of protectionIEC 60529:2001
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient conditions
Ambient temperature0 ... 50 °C (32 ... 122 °F)
Storage temperature-15 ... 50 °C (5 ... 122 °F)
Relative humidity≤ 93 % non-condensing
Shock resistance15 g , 11 ms
Vibration resistance1 g , 10 ... 150 Hz
Mechanical specifications
Degree of protectionIP20
Field sidescrew terminals , green
Control sidescrew terminals , green
HART : 1 x IDC plug, 26-pin
Core cross section0.25 ... 1.5 mm2 (24 ... 16 AWG)
Massapprox. 210 g
Dimensions110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W x H x D)
Height125 mm
Width110 mm
Depth61 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
CertificatePF 11 CERT 1930 X
MarkingEx-Hexagon II 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see


ECLASS 13.027210190
ECLASS 12.027210190
ECLASS 11.027210190
ECLASS 10.0.127210190
ECLASS 9.027210190
ECLASS 8.027210190
ECLASS 5.127242690
ETIM 9.0EC001485
ETIM 8.0EC001485
ETIM 7.0EC001485
ETIM 6.0EC001485
ETIM 5.0EC001485
UNSPSC 12.139121008

Details: FI-PFH-NS0137-R


This HART termination board has 16 terminal blocks to connect up to 16 HART field devices.

It has an integrated, switchable 220  load resistor and an integrated ground capacitor. It also has terminal blocks for the 4 mA ... 20 mA signal to the DCS/ PLC.

A 26-pin flat cable K-HM26 is used for connection of each HART Multiplexers KFD*-HM*-16 to the termination board.

Other termination boards are available. Contact Pepperl+Fuchs for details.

Product Documentation: FI-PFH-NS0137-R

Language Selection:
ManualsLanguageFile TypeFile Size
Manual KFD*-HM*-16ENGPDF8323 KB

Approvals: FI-PFH-NS0137-R

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3PF11CERT1930 XALLPDF193 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-1070DALLPDF107 KB

Associated Products: FI-PFH-NS0137-R

Matching System Components
679.00  USD

Contact Us

16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART Multiplexer Master KFD2-HMM-16, Up to SIL 3 acc. to IEC/EN 61508pa
16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 slave units can be connected, Up to SIL 3 acc. to IEC/EN 61508pa
K-System accessory, Connection cable for KF*-HM*-16 to Termination Board, 26-pin ribbon cablepa
K-System accessory, Connection cable for KFD2-HMM-16 to up to 15 KFD0-HMS-16, 14-pin ribbon cablepa