Serviceline
Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Background suppression sensor ML4.2-8-H-21-22-IR/40b/95/110

ML4.2-8-H-21-22-IR/40b/95/110
  • Precise background suppression
  • Very small black-white difference
  • Small, sharp light spot
  • Highly visible LEDs for Power-On, switching status, short-circuit, and undervoltage
  • Metal-reinforced fastening holes
  • Tamper-proof version with no adjustments
  • Push-pull output

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of ML4.2-8-H-21-22-IR/40b/95/110

Product Description
Background suppression sensor
General specifications
Detection rangeon white (90 %): : 10 ... 21 mm , on black (6 %): 10 ... 20 mm
Light sourceIRED
Light typemodulated infrared light , 880 nm
Black/White difference (6 %/90 %)approx. 1 mm
Diameter of the light spotapprox. 1.5 mm at 20 mm
Angle of divergenceapprox. 5 °
Functional safety related parameters
MTTFd1940 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLEDs yellow: light up when object is detected
Electrical specifications
Operating voltage10 ... 30 V DC
Output
Switching typelight/dark on electrically switchable
Signal outputPush-pull output, short-circuit protected, reverse polarity protected
Compliance with standards and directives
Standard conformity
Product standardEN 60947-5-2:2007
IEC 60947-5-2:2007
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Mechanical specifications
Degree of protectionIP67 / IP69K
ConnectionM8 x 1 connector, 4-pin
Material
HousingABS
Optical faceglass pane

Documents: ML4.2-8-H-21-22-IR/40b/95/110

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF392 KB

CAD+CAE: ML4.2-8-H-21-22-IR/40b/95/110

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS443 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP331 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML4.2-8-H-21-22-IR/40b/95/110

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-2149APDF186 KB

Associated Products: ML4.2-8-H-21-22-IR/40b/95/110

Accessories
8.00  USD

In stock

Mounting Clampfa
13.00  USD

In stock

Mounting bracket fa
16.00  USD

In stock

Mounting bracket fa
Mounting bracket fa
11.50  USD

In stock

Female cordset, M8, 4-pin, PVC cablefa
11.50  USD

In stock

Female cordset, M8, 4-pin, PVC cablefa