Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827
Not available for purchase

Diffuse mode sensor ML100-8-1000-RT/33/102/115-5M

ML100-8-1000-RT/33/102/115-5M
  • Miniature design
  • Easy to use
  • Very bright, highly visible light spot
  • Full metal thread mounting
  • Highly visible LEDs for Power ON and switching state
  • Not sensitive to ambient light

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  ML100-8-1000-RT/33/102/115-5M

Product Description
Diffuse mode sensor, plastic housing, 1000 mm adjustable detection range, red light, light/dark on, npn output, fixed cable
General specifications
Detection range0 ... 1000 mm
Light sourceLED
Light typemodulated visible red light
Polarization filterno
Diameter of the light spotapprox. 75 mm at a distance of 1000 mm
Angle of divergenceapprox. 2 °
Functional safety related parameters
MTTFd860 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow, lights up with receiver lit
Control elementssensitivity adjustment
Control elementsLight-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is: light on
Signal output1 NPN output, short-circuit protected, reverse polarity protected, open collector
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2
Mechanical specifications
Degree of protectionIP67
Connection5 m fixed cable
Material
HousingPC (Polycarbonate)
Optical facePMMA

CAD+CAE: ML100-8-1000-RT/33/102/115-5M

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS1585 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP1021 KB

Approvals+Certificates: ML100-8-1000-RT/33/102/115-5M

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0435DPDF163 KB

Associated Products: ML100-8-1000-RT/33/102/115-5M

Accessories
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
17.00  USD

In stock

Mounting aid for ML100 series, Mounting bracketfa
17.00  USD

In stock

Mounting aid for ML100 series, Mounting bracketfa
19.00  USD

In stock

Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
19.00  USD

In stock

Mounting aid for ML100 series, Mounting bracketfa
19.00  USD

In stock

Mounting aid for ML100 series, Mounting bracketfa
Mounting aid for ML100 seriesfa
Mounting aidfa

Function: ML100-8-1000-RT/33/102/115-5M

The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.