Select Your Country
VIM32PL-E1AC8-0RE-IO-1V1401 Vibration Sensor
Vibration sensor with IO-Link and programmable switching output or analog current output
Key Benefits at a Glance
- Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
- Vibration acceleration in g (rms) acc. to DIN ISO 10816/20816
- IO-Link Interface for process data, parameterization and diagnosis
- Switching output and current output parameterizable
- Additional temperature value output
- Rugged stainless steel housing
Show more









Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- EN
- DE
- ES
- FR
Technical data of VIM32PL-E1AC8-0RE-IO-1V1401
| Type | Vibration sensor | ||||||||||
| Measuring technology | MEMS capacitive | ||||||||||
| Series | Performance Line | ||||||||||
| Measured variable | Vibration velocity Vibration acceleration Temperature | ||||||||||
| Measuring range | |||||||||||
| |||||||||||
| Measurement accuracy | Vibration velocity: ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s Vibration acceleration: ± 0.01 g (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 | ||||||||||
| Cross-sensitivity | < 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis | ||||||||||
| Resolution | Vibration velocity: 0.01 mm/s Vibration acceleration: 0.01 g | ||||||||||
| Frequency range | 10 ... 1000 Hz | ||||||||||
| Averaging time | for v-rms: 2 s for a-rms: 2 s | ||||||||||
| Sampling rate | 8 kHz | ||||||||||
| MTTFd | 329 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % |
| Fusing | external fuse is required: 1 A , fast acting , 30 V DC | |
| Operating voltage | UB | 18 ... 30 V DC |
| Current consumption | max. 700 mA | |
| Power consumption | P0 | max. 21 W |
| Time delay before availability | tv | ≤ 1 s |
| Surge protection | up to 2 kV |
| Interface type | IO-Link (via C/Q = Pin 4) | |
| IO-Link revision | 1.1 | |
| Device profile | Identification and Diagnosis - I&D | |
| Process data | Input 16 Byte measurement channels: -rms value velocity - peak value acceleration - rms value acceleration - temperature per measurement channel: - measurement value 2 Byte - scaling 8 Bit - switching signals 2 Bit status data | |
| Vendor ID | 1 (0x0001) | |
| Device ID | 5308417 (0x510001) | |
| Transfer rate | COM2 (38.4 kBit/s) | |
| Min. cycle time | 5 ms | |
| SIO mode support | yes | |
| Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
| Output type | C/Q - Pin 4 in SIO mode (switching signal of the measured variable is programmable) | |
| Switching function | Normally open/closed (NO/NC) | |
| Operating current | ≤ 100 mA | |
| Short-circuit protection | yes |
| Output type | I/Q - pin 2 (parameterizable as analog current output or switching signal) - I: analog output for the measured variable, current 4 ... 20 mA - Q: switching signal of the measured variable is parameterizable, PNP normally open | |
| Switching function | Normally open/closed (NO/NC) | |
| Operating current | ≤ 120 mA for switching signal | |
| Voltage drop | < 2 V | |
| Output current | 4 ... 20 mA at analog output | |
| Load resistor | ≤ 500 Ω at analog output | |
| Short-circuit protection | yes |
| Degree of protection | DIN EN 60529, IP66, IP67 | |
| Shock resistance | DIN EN 60068-2-27, 60 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz | |
| Vibration evaluation | DIN ISO 10816/20816 |
| UL approval | ||||||||
| ||||||||
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type | plug | |||||||
| Housing material | Stainless steel 1.4305 / AISI 303 | |||||||
| Degree of protection | IP66 / IP67 only in connected state | |||||||
| Connector | ||||||||
| ||||||||
| Mass | approx. 100 g | |||||||
| Dimensions | ||||||||
| ||||||||
Related Pages
Are you looking for more information? Feel free to learn more on our related pages.
Related News and Applications
Read more on news and applications related to this product.



