Select Your Country

Go to global website

EPV-5500 Vent System Enclosure Protection Vent

Enclosure protection vent for 5500 series purge and pressurization system

Key Benefits at a Glance

  • One design, three flow rate variants to support your design requirements
  • Anodized aluminum with an optional stainless steel cap
  • Universal mounting
  • The -03 version of the EPV-5500 has a leakage rate of >1 L/min.
Product Compliance: Europe – CE
Approval symbol
Product Compliance: USA - cULus
Product Compliance: China – CCC
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • EN
  • DE

Technical data of EPV-5500 Vent System

Series5500
SystemType Z Purge ; Ex pzc Purge
Hazardous environmentgas or dust
Protective gas supplyinstrument grade air or inert gas
Maximum pressuredepends on the integrity of the enclosure (strength)
Purge flow rateSee graphs
Flow rate for leakage compensationEPV-5500....-01:
Less than 9.9 l/min (0.35 scfm) @ 0.63 mbar (0.25 in w.c.)
Less than 27.3 l/min (0.97 scfm) @ 1.9 mbar (0.75 in w.c.)
EPV-5500....-02:
Less than 6.6 l/min (0.23 scfm) @ 0.63 mbar (0.25 in w.c.)
Less than 16.0 l/min (0.57 scfm) @ 1.9 mbar (0.75 in w.c.)
EPV-5500....-03:
Less than 1 l/min (0.035 scfm) @ 0.63 mbar (0.25 in w.c.)
Less than 1 l/min (0.035 scfm) @ 1.9 mbar (0.75 in w.c.)
Breaking pressureEPV-5500....-01: 2.0 mbar (0.8 in. w.c.)
EPV-5500....-02: 3.5 mbar (1.4 in. w.c.)
EPV-5500....-03: 3.8 mbar (1.5 in. w.c.)
Degree of protectionEN 60529
Shock resistanceEN 60068-2
Ambient temperature-40 ... 70 °C (-40 ... 158 °F)
Relative humidity5 ... 95 %, non-condensing
Vibration resistance5 ... 100 Hz , 1 g, 12 m/s2, all axes
Impact resistance30 g, 11 ms, all axes
Degree of protectionEPV-5500....-01/02: mounting only Type 4X / IP66
EPV-5500....-03: Type 4X / IP66
Material
HousingEPV-5500-AA... body and cap: 6061T6 aluminum
EPV-5500-SS... body: 6061T6 aluminum, cap: 316L stainless steel
Spark arrestorAISI 316L, (1.4404) stainless steel
Installation- any orientation to enclosure
- not gravity dependent
- internal and external mounting possible
Massapprox. 1 kg (2.2 lb)
Dimensionssee dimensions
Mountingmounting hole 1.5 in NPT knockout (50.8 mm) hole sealing nut (provided)
Directive conformity
Directive 2014/34/EUpart of DEMKO 14 ATEX 1282X
UL approval
cULusUL File E184741
IECEx approvalpart of IECEx UL 14.0019X
Supplementary informationType Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
General Notes