NCB8-18GM50-Z4-V1 Inductive sensor

Key Benefits at a Glance

8 mm flush
Increased operating distance
2-wire DC

Product photo: Inductive sensor NCB8-18GM50-Z4-V1

Dimensions: Inductive sensor NCB8-18GM50-Z4-V1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV
ZH

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NCB8-18GM50-Z4-V1

Switching function		Normally open (NO)
Output type		Two-wire
Rated operating distance	s_n	8 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 6.48 mm ( -25 ... 70 °C (-13 ... 158 °F) ) 0 ... 6.08 mm ( -40 ... -25 °C (-40 ... -13 °F) )
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.7
Reduction factor r_Brass		0.5
Output type		2-wire

Operating voltage	U_B	3.5 ... 30 V
Switching frequency	f	0 ... 1000 Hz
Reverse polarity protection		reverse polarity-conductive
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 3.5 V
Temperature drift		± 15%
Operating current	I_L	2 ... 100 mA
Off-state current	I_r	typ. 0.8 mA
Switching state indicator		LED, yellow
Stability alarm indicator		LED, red
Stability control-switch point		0,8 s_r ... 0,9 s_r

MTTF_d		1370 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature

-40 ... 70 °C (-40 ... 158 °F)

Connection type

Connector plug

Housing material

brass, nickel-plated

Sensing face

PBT

Degree of protection

IP67

Connector

Threading		M12 x 1
Number of pins		4

Mass

57 g

Dimensions

Length		65 mm
Diameter		18 mm

General Notes