NJ6-F-E2 Inductive sensor

Key Benefits at a Glance

6 mm flush
3-wire DC
Polarity reversal protected

Product photo: Inductive sensor NJ6-F-E2

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV
ZH

Datasheet Classification Product Documentation Design / Simulation Approvals

Technical data of NJ6-F-E2

Switching function		Normally open (NO)
Output type		PNP
Rated operating distance	s_n	6 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 4.8 mm
Actual operating distance	s_r	5.4 ... 6.6 mm typ.
Reduction factor r_Al		0.22
Reduction factor r_Cu		0.2
Reduction factor r₃₀₄		0.7
Output type		3-wire

Operating voltage	U_B	10 ... 60 V DC
Switching frequency	f	0 ... 500 Hz
Hysteresis	H	0 ... 0.3 mm typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 3 V
Operating current	I_L	0 ... 200 mA
Off-state current	I_r	≤ 0.5 mA
No-load supply current	I₀	≤ 20 mA
Time delay before availability	t_v	≤ 15 ms
Switching state indicator		LED, yellow

MTTF_d		990 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Connection type

cable

Housing material

PBT

Sensing face

PBT

Degree of protection

IP67

Cable

Wire end ferrules		yes
Cable diameter		4.8 mm ± 0.2 mm
Bending radius		> 10 x cable diameter
Material		PUR
Color		black
Number of cores		3
Core cross section		0.34 mm²
Length	L	2 m

Mass

89 g

Dimensions

Height		12 mm
Width		30 mm
Length		45 mm

General Notes