NBN8-18GM50-E2-C-V1 Inductive sensor

Key Benefits at a Glance

8 mm non-flush
Weld Immune

Product photo: Inductive sensor NBN8-18GM50-E2-C-V1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NBN8-18GM50-E2-C-V1

Switching function		Normally open (NO)
Output type		PNP
Rated operating distance	s_n	8 mm
Installation		non-flush
Output polarity		DC
Assured operating distance	s_a	0 ... 6.48 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.2
Reduction factor r₃₀₄		0.6
Output type		3-wire

Operating voltage	U_B	10 ... 30 V DC
Switching frequency	f	0 ... 500 Hz
Hysteresis	H	typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 3 V
Operating current	I_L	0 ... 200 mA
Off-state current	I_r	0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current	I₀	≤ 17 mA
Constant magnetic field	B	150 mT
Alternating magnetic field	B	150 mT
Operating voltage indicator		LED, green
Switching state indicator		Multihole-LED, yellow

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Connection type

Connector plug M12 x 1 , 4-pin

Core cross section

-

Housing material

Brass, PTFE coated

Sensing face

PPS

Degree of protection

IP67

Dimensions

Length		50 mm
Diameter		18 mm

General Notes