NBB2-6,5S16-E2-Y273690 Inductive sensor

Key Benefits at a Glance

Basic series
Increased operating distance

Product photo: Inductive sensor NBB2-6,5S16-E2-Y273690

Dimensions: Inductive sensor NBB2-6,5S16-E2-Y273690

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals

Technical data of NBB2-6,5S16-E2-Y273690

Switching function		Normally open (NO)
Output type		PNP
Rated operating distance	s_n	2 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 1.62 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.25
Reduction factor r₃₀₄		0.7
Reduction factor r_St37		1
Reduction factor r_Brass		0.4
Output type		3-wire

Operating voltage	U_B	10 ... 30 V
Switching frequency	f	0 ... 5000 Hz
Hysteresis	H	≤ 10 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 2 V
Operating current	I_L	0 ... 200 mA
Off-state current	I_r	≤ 0.1 mA
No-load supply current	I₀	≤ 10 mA
Switching state indicator		LED

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Connection type

cable PVC , 2 m

Core cross section

0.14 mm²

Housing material

Stainless steel 1.4305 / AISI 303

Sensing face

PA 12

Degree of protection

IP67

Dimensions

Length		16 mm
Diameter		6.5 mm

General Notes