Seleccione su país
IQT1-F61-IO-V1 RFID Read/Write Device
HF RFID read/write device with IO-Link in accordance with ISO 15693
Ventajas clave de un vistazo
- Operating frequency 13.56 MHz
- IO-Link interface
- Conforms to ISO 15693
- Suitable for FRAM transponder
- LEDs as function indicators
- Particularly flat construction
- Connection cable with V1 plug (M12 x 1)
- Degree of protection IP67
- Can be mounted on metal
- For connection to IO-Link master
Mostrar más
Tipo preferido

















Nota
Todos los documentos relacionados con los productos, como certificados, declaraciones de conformidad, etc., que se emitieron antes de la conversión con el nombre de Pepperl+Fuchs GmbH o Pepperl+Fuchs AG también se aplican a Pepperl+Fuchs SE.
EN
- EN
- DE
Datos técnicos de IQT1-F61-IO-V1
| Operating frequency | 13.56 MHz | ||||||||||
| Transfer rate | 26 kBit/s | ||||||||||
| Sensing range | |||||||||||
| |||||||||||
| MTBF | 140 a (Operation at +40 °C) | ||||||||||
| LED green | Illuminated: power on Flashing: IO-Link communication | |
| LED yellow | Data carrier detected | |
| LED red | Flashing: IO-Link communication interrupted | |
| LED blue | Write/read attempt is being performed |
| Rated operating voltage | Ue | 20 ... 30 V DC , ripple 10 %SS |
| No-load supply current | I0 | ≤ 70 mA (at 24 V DC) |
| Power consumption | P0 | ≤ 2 W |
| Interface type | IO-Link | |
| IO-Link revision | 1.1 | |
| Process data | Input 32 Byte Output 32 Byte | |
| Vendor ID | 1 (0x0001) | |
| Device ID | 4194561 (0x400101) | |
| Data transfer rate | COM3 (230.4 kbits/s) | |
| Min. cycle time | 4 ms | |
| SIO mode support | no | |
| Compatible master port type | Class A Class B |
| Radio equipment | |||||
| |||||
| RoHS | |||||
| |||||
| Electromagnetic compatibility | EN 301489-3 | |
| Degree of protection | EN 60529 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.2 | |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
| UL approval | E87056 cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. | |
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. | |
| KCC approval | R-R-PF1-IQT1-F61-IO-V1 | |
| MIC approval | AC-21097 | |
| Radio approval | USA: FCC IREIQT1F61IO Canada: IC 7037A-IQT1F61IO |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection | IP67 | ||||||||||
| Connection | connector M12 x 1 | ||||||||||
| Material | |||||||||||
| |||||||||||
| Installation | |||||||||||
| |||||||||||
| Mass | approx. 60 g | ||||||||||
| Dimensions | |||||||||||
| |||||||||||
| Cable length | 20 cm | ||||||||||
Páginas relacionadas
¿Busca más información? Puede obtener más información en nuestras páginas relacionadas.




