Sélectionnez votre pays
IC-KP2-2HB21-2V1D RFID Evaluation Unit
IDENTControl Compact RFID evaluation unit with EtherCAT interface
Principaux avantages en un coup d'œil
- LED status indicator of bus communication and read/write heads
- Max. 2 read/write heads can be connected
- Alternatively 1 read/write head and 1 trigger sensor can be connected
Type préféré











Remarque
Tous les documents relatifs aux produits, tels que les certificats, les déclarations de conformité, etc., qui ont été émis avant la conversion sous le nom de Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, s'appliquent également à Pepperl+Fuchs SE.
EN
- EN
- DE
Données techniques relatives à IC-KP2-2HB21-2V1D
| Number of read/write heads | max. 2 alternatively 1 read/write head and 1 trigger sensor | |
| UL File Number | E87056 | |
| MTBF | 80 a (Operation at +40 °C) |
| LEDs 1, 2 | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed | |
| LEDs CH1, CH2 | green: read head detected red: Configuration error | |
| LED PWR/ERR | green: power on red: Hardware fault | |
| LED RUN | Off: init Flashing (green): pre-operational Single flash (green): safe-operational On (green): operational |
| Rated operating voltage | Ue | 20 ... 30 V DC , PELV |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 4 A incl. read/write heads | |
| Power consumption | P0 | 3.5 W Without read/write heads |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff |
| Interface type | EtherCAT (IN) | |
| Physical | Ethernet | |
| Protocol | EtherCAT® | |
| Transfer rate | 100 MBit/s |
| Interface type | EtherCAT (OUT) | |
| Physical | Ethernet | |
| Protocol | EtherCAT® | |
| Transfer rate | 100 MBit/s |
| Interface type | Diagnostic Interface | |
| Physical | RS 232 | |
| Protocol | ASCII | |
| Transfer rate | 38.4 kBit/s |
| Electromagnetic compatibility | |||||
| |||||
| RoHS | |||||
| |||||
| Degree of protection | IEC 60529 |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 | |
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
| Degree of protection | IP67 | ||||||||||
| Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M4 earthing screw Diagnostic RS 232: M8 connector EtherCAT: M12 connector, D-coded | ||||||||||
| Material | |||||||||||
| |||||||||||
| Installation | screw fixing | ||||||||||
| Mass | approx. 300 g | ||||||||||
| Dimensions | |||||||||||
| |||||||||||
Pages associées
Vous cherchez plus d'informations ? N'hésitez pas à consulter nos pages associées pour en savoir plus.


