See Overview: Pepperl+Fuchs provides 120/240 V AC power supplies to deliver 24 V DC at 4 A or 500 mA Our power supplies add flexibility to the installation and enhance the power distribution options for K-System isolated barriers ... Power supplies Pepperl+Fuchs provides 120/240 V AC power supplies to deliver 24 V DC at 4 A or 500 mA. These units connect to the Power Rail and eliminate the need for power feed modules. They add flexibility to the installation and enhance ...
They are functional and yet can be used flexibly—the cylindrical photoelectric sensors of the M18 series offer five functional principles in three designs—each with a uniform interface Learn more about the photoelectric M18 series ... M18 sensor series ideally suited for a wide range of standard applications. Highlights of the M18 Series Five sensing modes in three designs for standard applications Time- and cost-saving integration as well as sensor commissioning due to intuitive ...
Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... diagram. Direct-Current Voltage 10 V ... 60 V Sensor type 2-wire Z/E0, Z1, Z2, Z3, Z4, Z5 Standard type Reverse polarity protection Short-circuit proof Wiring diagram according to EN 60947-5-2 NO contact or NC contact Example: NO contact Z/Z0 Typical ...
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our FB Zone 1 remote I/O systems ... As part of its FB system remote I/O solution , Pepperl+Fuchs offers power supplies for use in Zone 1 explosion-hazardous areas . These remote I/O power supplies are available in 24 V DC, 115 V AC, and 230 V AC versions and feed the I/O modules ...
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our LB Zone 2 remote I/O systems ... See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our LB Zone 2 remote I/O systems. ...
See Overview: Pepperl+Fuchs plugs, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A Due to low contact resistance, the devices require a low insertion and removal force This allows them to be unplugged ... Pepperl+Fuchs plugs, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A. Due to low contact resistance, the devices require a low insertion and removal force. This allows them to be unplugged quickly. Plugs PS ...
See Overview: Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A The devices provide IP66 protection even when plugged in due to the bayonet connector ... Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A. The devices provide IP66 protection even when plugged in due to the bayonet connector. Sockets PS*-4* Ex de and Ex t certified sockets ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of three-wire sensors ... -closed (E3) NPN, normally-open/normally-closed, switchable (E4) PNP, normally-open/normally-closed, switchable (E5) PNP, normally-open, 2-channel (E8) PNP/NPN, push-pull output (EP) 3-Wire Analog Sensors for Direct-Current Voltage Operation These sensors ...
Explore the Pepperl+Fuchs knowledge base to learn more about the different versions of inductive sensors ... for the analog input of their programmable logic controller (PLC). According to EN 60947-5-2, the repeat accuracy is the deviation value of the effective operating distance (s r ) under set conditions. The value defines the switch point accuracy of successive ...
... operating current (I e ) This value specifies the maximum load current during continuous operation. cf. EN 60947-5-2 Rated operating distance (s n ) The rated operating distance is a normative variable for defining the operating distances. This distance does ...
11-20/122Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.