Electromechanical summator, 7 decade devices, Counter frequency up to 25 Hz, Without reset, Power supply 230 V AC, Operating voltage: 230 V AC, Dimensions: 48 mm x 24 mm x 54 mmfa
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our FB Zone 1 remote I/O systems ... As part of its FB system remote I/O solution , Pepperl+Fuchs offers power supplies for use in Zone 1 explosion-hazardous areas . These remote I/O power supplies are available in 24 V DC, 115 V AC, and 230 V AC versions and feed the I/O modules ...
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our LB Zone 2 remote I/O systems ... See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our LB Zone 2 remote I/O systems. ...
See Overview: Pepperl+Fuchs plugs, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A Due to low contact resistance, the devices require a low insertion and removal force This allows them to be unplugged ... Pepperl+Fuchs plugs, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A. Due to low contact resistance, the devices require a low insertion and removal force. This allows them to be unplugged quickly. Plugs PS ...
See Overview: Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A The devices provide IP66 protection even when plugged in due to the bayonet connector ... Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A. The devices provide IP66 protection even when plugged in due to the bayonet connector. Sockets PS*-4* Ex de and Ex t certified sockets ...
Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... data Basic series 5V/4 mA … 100 mA Standard series 4 V/2 mA … 200 mA Residual current 0.7 mA/0.5 mA Basic Series 10 V ... 30 V, 100 mA Standard Series 10 V ... 60 V, 200 mA Sensor type 3-wire E/E0, E1, E2, E3, E5, E8 Short-circuit proof Reverse ...
Find out more about radar reflectivity and radar cross-section (RCS) ... and are therefore more easily detected by the radar. The response curve shown here is an example of the wide range in which Pepperl+Fuchs radar sensors reliably detect a corner reflector with a radar cross section of 70 m² used as a reference. Smaller detection ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... sensors. This input type is suitable for signals from semiconductor switches, e.g., two-wire sensors according to the standard for proximity sensors (IEC 60947-5-2). These inputs have an increased current consumption of up to 30 mA for two-wire sensors per ...
See Overview: The SC-System signal conditioners are especially designed for general-purpose applications and ensure an absolute reliable process communication ... to Power Bus Minimal space requirements due to 6 mm module width and 97 mm height Extended temperature range from -25° C to 70° C Maximum protection of people and equipment by high-quality galvanic isolation with 300 V operating- / 3 kV test voltage ...
Explore the Pepperl+Fuchs knowledge base to learn more about the different versions of inductive sensors ... for the analog input of their programmable logic controller (PLC). According to EN 60947-5-2, the repeat accuracy is the deviation value of the effective operating distance (s r ) under set conditions. The value defines the switch point accuracy of successive ...
... operating current (I e ) This value specifies the maximum load current during continuous operation. cf. EN 60947-5-2 Rated operating distance (s n ) The rated operating distance is a normative variable for defining the operating distances. This distance does ...
11-20/157Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.