1-channel isolated barrier, 24 V DC supply (loop powered), Current or voltage input, Output: 4 ... 20 mA, Potentiometer or DIP switch selectable ranges, Line fault detection (LFD), Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 12 ... 35 V DC loop powered, Signal: 1 x 4 ... 20 mA (current sink)pa
With the KCD2-SCD-Ex1ES SMART current driver, Pepperl+Fuchs meets the boundary conditions of functional safety according to SIL 3 without the use of special emergency shutdown valves and safety shut-off valves ... by actuating these controllers with HART signals for partial stroke tests in addition to their actual function. These tests allow for functional inspection testing without shutting down the entire media supply and without redundant hardware. The KCD2-SCD-Ex1.ES ...
The new ICE11 IO-Link master for PLC-based applications is multiprotocol-capable and now supports not only PROFINET, EtherNet/IP, and MODBUS TCP but also EtherCAT and CC-Link IE Field Basic It can be used worldwide in various application areas ... . Highlights of the ICE11 IO-Link Master Multiprotocol for worldwide use: PROFINET, EtherNet/IP, EtherCAT, CC-Link IE Field Basic, and MODBUS TCP in one device Especially for time-critical applications: EtherCAT variant with extremely short cycle times ...
A combination of a pressure transmitter with a transmitter power supplyl is ideally suited for constantly monitoring the oil pressure in lubrication cycles ... power supply unit provides an intrinsically safe power supply and ensures that the data is reliably transmitted. KCD2-STC-Ex1.ES modules are typically used for this application. They are suitable for applications up to SIL 3 in accordance with IEC/EN ...
Configure your VisuNet FLX Edge and request a quote ... like RDP, VNC etc. Runs Pepperl+Fuchs RM Shell as firmware / OS Additional firmware VisuNet CC allows users to efficiently manage all HMI systems Industrial grade PC system Uses standard Ethernet technology Comes with Windows operating system ...
Signal conditioners guarantee dependable conversion and transmission of signals in the vulcanization process during tire manufacturing Learn more about the application ... solution in this case. Various K-System signal conditioners could be used. The loop-powered RTD signal converter KFD0-TR-1 can be used as a direct replacement for a head-mount transmitter. One key advantage in comparison to competitors’ products ...
Explore the Pepperl+Fuchs knowledge base to learn more about the communication interfaces of inductive sensors ... /IP. CC-Link CC-Links are open, industrial networks used for control and for information transmission . The fieldbus solution has a high transfer speed and deterministic communication. CC-Link can be used for machine control and for controlling ...
Use our HMI configurator to tailor your individual VisuNet FLX solution for industrial and explosion-hazardous areas ... monitor Uses standard Ethernet technology Almost no range limitation Connection to the Host via Ethernet Can be connected via remote desktop protocols like RDP, VNC etc. Runs Pepperl+Fuchs RM Shell as firmware / OS Additional firmware VisuNet CC allows ...
See Overview: Pepperl+Fuchs offers a wide range of frequency converters for our K-System isolated barriers ... an additional analog output for frequency evaluation and switch outputs for limit value functions. Timer KF**-DU-EX1.D The Timer module DU offers the following time functions: Passing contact Retriggerable passing contact Pickup delay Dropout delay Stepping function ...
See Overview: Pepperl+Fuchs' IO-Link masters facilitate reliable communication between management and sensor/actuator levels ... reduced, primarily in large-series production plants. With its multiprotocol functionality, the ICE11 IO-Link master supports PROFINET, EtherNet/IP, EtherCAT, CC-Link, and MODBUS TCP. This means that the IO-Link master can be ideally incorporated ...
Visit the "Functional Safety Hub" from Pepperl+Fuchs where you find safety assessed devices for process industry applications and also get access to helpful tools and brochures ... power supply unit provides an intrinsically safe power supply and ensures that the data is reliably transmitted. KCD2-STC-Ex1.ES modules are typically used for this application. They are suitable for applications up to SIL 3 in accordance with IEC/EN ...
1-10/13Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.