Surge protection for 1 supply line, Type 2 acc. to EN 61643-11, For 120 V, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 1pa
Surge Protection Technology for Process Industry from Pepperl+Fuchs ... . Based on more than 20 years of experience , Pepperl+Fuchs has acquired significant know-how in surge protection. M-LB-4000 offers reliable diagnostics, easy handling and a space saving housing design. Discover the Pepperl+Fuchs surge protection portfolio ...
From barcode scanners to 2-D code readers and handhelds to special solutions—get to know Pepperl+Fuchs' optical identification portfolio ... Optical Identification | Pepperl+Fuchs Optical Identification Benefits Stationary 2-D Code Readers Stationary Barcode Scanners 2-D Code Handheld Readers Special Solutions Contact Us Reliably Identified Mobile and stationary sensors—from barcode ...
With their flexibility and modularity, the VOS 2-D universal vision sensors offer the perfect solution for your vision application Learn more about the components and software of the VOS sensor series ... megapixels and at the same time VOS—2-D Universal Vision Sensor The comprehensive integrated vision tool set of the VOS devices can be flexibly combined so that the most diverse automation tasks in the 2-D vision field can be solved with just one sensor . Due ...
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas Learn more about the USi-safety ultrasonic sensor ... , the parameterization software can be used to initialize periodic tests and to generate safety protocols for the required safety verification in a fully automated manner. Two Category 3 PL d Safe Systems on a Single Evaluation Unit Up to two ultrasonic sensor units ...
See Overview: Backplanes are holding LB Remote I/O Modules, Com units and power supplies ... For mounting the interface modules of the remote I/O LB system, Pepperl+Fuchs offers backplanes for use in Zone 2, Class I/Div. 2 explosion-hazardous areas . Different sizes are available as base or extension backplanes. They carry any combination ...
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our LB Zone 2 remote I/O systems ... As part of its LB system remote I/O solution , Pepperl+Fuchs offers a power supply for use in Zone 2, Class I/Div. 2 explosion-hazardous areas . This 24V remote I/O power supply in protection type Ex nA feeds the I/O modules and com units/gateways ...
See Overview: Our Pepperl+Fuchs Bebco EPS 1000 series Type Z purge system is suitable for Class I, Division 2 to non-hazardous area applications & Class II, Division 2 to non-hazardous area applications ... and ISA 12.4 standards Enclosure volumes to 450 cu. ft Note: Vents are required for most Type Z purge enclosures Type Z purge system models - 1000 series 1001A : Class I Enclosure Volumes ≤ 2 ft3 and Class II Enclosure Volumes ≤10 ft3 , WPS Only 1001B ...
See Overview: Our Pepperl+Fuchs Bebco EPS 2000 series, Type Y purging system is an automatic system that will purge and pressurize the protected enclosure and maintain pressure within the enclosure ... standards Enclosure volumes to 450 cu. ft Note: Vents are required for most Type Y purge enclosures Type Y purge system models - 1000 series 1001A : Class I Enclosure Volumes ≤ 2 ft3 and Class II Enclosure Volumes ≤10 ft3 , WPS Only 1001B : Class II ...
See Overview: Pepperl+Fuchs offers relay output modules for our LB Zone 2 remote I/O systems 2-, 4- and 8- channel modules for valves, solenoid valves, optical and audible alarms ... in Zone 2, Class I/Div.2 explosions-hazardous areas , Pepperl+Fuchs provides relay outputs with Ex nA terminals . As part of the LB system remote I/O solution , our relay output modules are available in 4- and 8-channel versions , ensuring the highest ...
See Overview: Pepperl+Fuchs offers temperature input modules for our LB Zone 2 remote I/O systems 1- and 4-channel temperature input modules for Pt 100 resistance thermometers, slide wire sensors, thermocouples and mV signals ... of protection Ex i . These signal converters are rated for use in Zone 2, Class I/Div. 2 explosion-hazardous areas and allow connection of different resistance thermometers (2-, 3- and 4-wire Pt100 ... Pt1000), thermocouples, and mV signals. LB system remote I/O ...
1-10/336Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.