Explore the Pepperl+Fuchs knowledge base to learn more about the electrical connections of inductive sensors ... diagram. Direct-Current Voltage 10 V ... 60 V Sensor type 2-wire Z/E0, Z1, Z2, Z3, Z4, Z5 Standard type Reverse polarity protection Short-circuit proof Wiring diagram according to EN 60947-5-2 NO contact or NC contact Example: NO contact Z/Z0 Typical ...
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our FB Zone 1 remote I/O systems ... As part of its FB system remote I/O solution , Pepperl+Fuchs offers power supplies for use in Zone 1 explosion-hazardous areas . These remote I/O power supplies are available in 24 V DC, 115 V AC, and 230 V AC versions and feed the I/O modules ...
See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our LB Zone 2 remote I/O systems ... See Overview: Pepperl+Fuchs offers 24 VDC, 115 V AC and 230 VAC power supplies for our LB Zone 2 remote I/O systems. ...
See Overview: Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A The devices provide IP66 protection even when plugged in due to the bayonet connector ... Pepperl+Fuchs sockets, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A. The devices provide IP66 protection even when plugged in due to the bayonet connector. Sockets PS*-4* Ex de and Ex t certified sockets ...
See Overview: Pepperl+Fuchs plugs, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A Due to low contact resistance, the devices require a low insertion and removal force This allows them to be unplugged ... Pepperl+Fuchs plugs, available in 2-, 3-, 4- and 5-pole versions, have full AC-3 switching capacity up to 125 A. Due to low contact resistance, the devices require a low insertion and removal force. This allows them to be unplugged quickly. Plugs PS ...
Explore the Pepperl+Fuchs knowledge base to learn more about the power source of two-wire sensors ... independent Like Z0, but different plug pinout Z4 Normally-open, reverse polarity protected Voltage drop ≤ 3.8 V Z4L Normally-open, reverse polarity protected Like Z4, but less residual current Z5 Normally-closed, reverse polarity protected Voltage drop ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... sensors. This input type is suitable for signals from semiconductor switches, e.g., two-wire sensors according to the standard for proximity sensors (IEC 60947-5-2). These inputs have an increased current consumption of up to 30 mA for two-wire sensors per ...
Explore the Pepperl+Fuchs knowledge base to learn more about the different versions of inductive sensors ... for the analog input of their programmable logic controller (PLC). According to EN 60947-5-2, the repeat accuracy is the deviation value of the effective operating distance (s r ) under set conditions. The value defines the switch point accuracy of successive ...
... operating current (I e ) This value specifies the maximum load current during continuous operation. cf. EN 60947-5-2 Rated operating distance (s n ) The rated operating distance is a normative variable for defining the operating distances. This distance does ...
With the R202 series, Pepperl+Fuchs offers a new portfolio of photoelectric sensors in cubic design Special features make these sensors the first choice for material handling applications ... makes installation particularly quick and simple. In addition, the R202 series is also ideal for applications where AC voltage is required. All variants include an AC/DC power supply with a voltage of 24–240 V if required. This makes the sensors suitable ...
11-20/122Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.