Select Your Country

Go to global website

G20 motor control module in a mounting rail
Driving Conveyor Technology.

Unmatched housing advantages: perfected for seamless integration and easy installation.

G20 Series Motor Control Modules

G20 motor control modules with different communication protocols

The Optimum Solution for Every Application

The G20 control module for MDRs have an application-optimized, slim design that allows direct installation in the mounting rail of the roller conveyor line. All connection cables for sensors and motorized rollers are already integrated in the module. The flat cable for communication and/or powering can easily be inserted in the last step.

Compatible with a wide range of 24 V and 48 V motorized rollers on the market, and available with IO-Link, AS-Interface (ASi), or as Ethernet system, the G20 series delivers maximum flexibility and efficiency for your application.

Benefits

conveyor belt icon

Tailor-Made for Conveyor Technology

The G20 series modules are compatible with a wide range of 24 V and 48 V motorized rollers, offering maximum flexibility for conveyor technology applications. To meet diverse application requirements, the modules are available with IO-Link, AS-Interface, or as Ethernet system—each providing distinct advantages to enable a perfectly tailored solution.

puzzle icon

Seamless Integration

The compact housing design and the sophisticated piercing technology allow for easy and quick integration of the G20 modules into a wide variety of conveyor lines. The tool-free piercing technology enables the pre-assembly of individual conveyor segments, which can be put into operation directly on site.

diagnostic data icon

Extended Diagnostics

Most motorized rollers on the market provide only a single error bit. To enable detailed diagnostics nonetheless, the G20 series captures a wide range of status data directly within its modules. Depending on the selected technology, this includes current and voltage measurements, operating hours, temperature, error counters, and more.

price tag icon

Increased Cost-Efficiency

As the sensor-actuator cable is already integrated in the module, no additional cables are required for wiring. Depending on the application requirements, motorized rollers can be controlled with 24 V or 48 V; as the 48 V motorized rollers boast a better performance, fewer power supply units can be installed along the conveyor line and potential savings can be fully exploited.

Features of the G20 Variants

Find out more about the sophisticated features of the different G20 motor control modules.

G20 motor control module in mounting rail

Compact Housing Design

The housing of the G20 motor control modules is designed to be integrated into the mounting rail in a particularly space-saving manner.

G20 motor control module in mounting rail

Tool-free Mounting Concept

All modules are equipped with a flat cable connection that enables tool-free installation using piercing technology. Sensor and actuator cables are also integrated into the module, allowing the conveyor line to be set up cost-effectively and without any special prior knowledge.

pre-assembled conveyor segments on a rack

Pre-Assembly of Individual Conveyor Segments

You have the option of ordering individual conveyor segments pre-assembled together with all modules and settings. In the final step, the yellow flat cable and the sensors are integrated on site so that the system can be put back into operation immediately.

G20 motor control module with IO-Link at a buffer zone

Using the Benefits of IO-Link

The G20 module with IO-Link makes most of its benefits at points with a high IO density, such as buffer zones, sorting points or intersections with elevators, where it ensures a reliable flow of goods. It collects up to eight digital signals and controls up to four motorized rollers simultaneously.

The Optimum Solution for Every Application

G20 series MDR control modules topology

The modules of the G20 series have the ability to control the start/stop functionality, the direction of rotation, the acceleration/deceleration, and the speed of the motorized rollers within the conveyor system. Besides, they can also be used to collect digital IOs allowing system operators to choose the solution that fits best for their specific use case.

A Comparison of Technologies

Get an overview of the advantages of the available communication protocols and for which applications they are best suited.

G20 Ethernet system in a conveyor system

G20 Ethernet System

  • Powerful, scalable system for a wide range of applications, enabling flexible control of up to 120 MDRs via a single IP address
  • Comprises an Ethernet G20 Controller with four lines, each supporting up to 15 Ethernet G20 MDR modules, each with two MDR outputs and four I/Os
  • Provides extensive diagnostic data, including current and voltage measurements, to enhance condition monitoring
  • Allows combination of both decentralized ZPA mode and PLC-controlled operation for optimal resource management
  • Supports PROFINET and EtherNet/IP fieldbus protocols in a single module
G20 module with AS-Interface in a conveyor line

G20 Module with AS-Interface

  • Simple, cost-effective solution for widely distributed sensors and actuators
  • Uses a yellow flat cable for system power and bidirectional 4-bit data communication, plus a black flat cable for auxiliary power supply
  • Piercing technology enables flexible connections along the flat cable while reducing wiring effort
  • ASi double gateways support up to 124 devices, each with 4-bit bidirectional data communication and a peripheral fault bit
  • ASi G20 modules can connect up to two MDRs and two digital I/Os
zpa logic illustration

Zero Pressure Accumulation ZPA

Zero Pressure Accumulation (ZPA) is a conveying logic used in intralogistics that reliably prevents packages from colliding along a conveyor line.

To achieve this, the line is divided into individually controllable zones. Each zone has its own motor and a separate sensor. The ZPA logic ensures that there is always only one package in each zone. Conveyance continues only when the next zone is clear. This maintains a defined distance between the conveyed products and ensures a smooth, collision-free material flow.

In traditional applications, the comparably simple ZPA logic is implemented centrally in a controller, which consumes corresponding resources. To reduce the load on the controller, Pepperl+Fuchs offers two options for implementing the ZPA logic decentrally without using central control resources:

packages along a conveyor line with g20 zpa modules

These modules operate completely independently and do not require a higher-level PLC. All logic is executed directly within the module. Settings such as operating mode, motor speed, and start and stop ramps are configured via rotary switches on the rear of the module. This simplifies the system significantly, but also implies that no status or diagnostic data is available to higher-level systems.

G20 Ethernet System in a mounting rail of a complex conveyor system

As an alternative to conventional control operation, the ZPA logic can be optionally activated for each motor module. This allows for greater flexibility in determining whether complex processes are coordinated centrally by the PLC or carried out directly by the module in decentralized ZPA mode for conservation of resources. At the same time, continuous communication with higher-level systems such as PLCs or IIoT applications is maintained, ensuring full access to status and diagnostic data at all times.

technical support

The Right Solution for Your Conveyor System Application

With Pepperl+Fuchs as your partner in the field of industrial communication, you receive a comprehensive all-round solution for conveyor systems. In addition to the various G20 modules for controlling DC motorized rollers, we offer you the right infrastructure for setting up flexible and cost-efficient conveyor lines.

In addition to the constantly growing AS-Interface and IO-Link portfolio, we are already working on further interfaces that will enable system planners to configure individual solutions for their conveyor systems in the future using a modular principle.

Supported Motor Roller Manufacturers

  • Conveline
  • Interroll
  • Itoh Denki
  • Mambaroll
  • MTA
  • Pulseroller
  • Rulmeca
  • Unidrive
  • Winroller

The motor rollers you are using is not listed? Please feel free to concact us and see whether we can do an engineering for your system and set up an individual solution for your application.

Downloads

  • G20 Modules

    Download the brochure on the G20 Series Motor Control Modules

  • G20 ZPA Standalone Module

    Download the brochure on the G20 ZPA Motor Control Module

Contact Us

Are you looking for a suitable solution for your conveyor application and would like to find out more about the various modules in the G20 series for controlling motorized rollers? We will be happy to help you. Simply fill out the contact form and send us a message.