Analog output, load-dependent voltage or current, Parameterisable measuring range, Measurement range: max. 360° min. 45°, Operating voltage: 18 ... 30 V DC, Output type: current output or voltage output (load dependend) 4 ... 20 mA (RL < 400 Ω) 0 ... 10 V (RL > 3.3 kΩ), UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connectorfa
Analog position indicator with end position monitoring, 2 configurable switching frames, Preset range of angle measurement 0 ... 90°, Extended analog signal range, Measurement range: max. 180° min. 90°, Operating voltage: 18 ... 30 V DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable, Output type: current output 3.8 ... 20.5 mA (RL < 400 Ω), UL approval: cULus Listed, General Purpose, Class 2 Power Sourcefa
구매 불가 제품: Measuring range 0 ... 360°, Analog output 4 mA ... 20 mA, Option of parameterizing signaling zone, position and width, Output polarity: DC, Measurement range: 360°, Type of voltage: DC, Output type: 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected, Output type: 1 current output: 4 ... 20 mA, UL approval: cULus Listed, General Purpose Class 2 power source, Connection type: 5-pin, M12 x 1 connector, Housing material: PBT, Degree of protection: IP67fa
구매 불가 제품: Position sensor for PAX001, Measuring range 0 ... 360°, RS 232 transmission, Operating voltage: 18 ... 30 V DC, Type of voltage: DC, Interface type: RS 232, for communication with interface box PAX..., UL approval: cULus Listed, General Purpose, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: 5-pin, M12 x 1 connector, Housing material: PBT, Degree of protection: IP67fa
See Overview: Pepperl+Fuchs의 인덕티브 위치 측정 시스템 PMI는 모든 산업용 위치 제어 작업에 이상적인 솔루션을 제공합니다. 이 시스템은 PMI 센서와 스틸로 만든 액추에이터로 구성됩니다.. Its sensing range of up to 6 mm can handle large mechanical tolerances without affecting measurement precision. F130 series PMI positioning system The F130 series PMI positioning system converts a measurement angle from 0° to 360° to an analog signalThe PMI inductive positioning system is used to detect linear position and measure rotation angle . The positioning system is reliable in dusty and dirty environments and under extreme temperature fluctuations. A patented configuration and wiring of
Pepperl+Fuchs offers the inductive positioning systems PMI F90 and PMI F112 that feature comprehensive functions, paving the way for modern industry 4.0 applications … new applications to our customers. A recent innovation is our inductive positioning systems PMI F90 and PMI F112 . These systems feature comprehensive functions , paving the way for modern Industry 4.0 applications : Both sensor types are equipped measurements are achieved within the tolerance range—even under strong vibrations. Due to ATEX certification for Zone 2/22 or Division 2 , these positioning systems can operate in explosion-hazardous areas . The positioning system PMI F90 The data storage