AS-Interface safety module VAA-2E2A-CB10-SJ/E2J-FL

Connection of contact safety switches, e.g. EMERGENCY STOP button
Applications up to Cat. 4, PL_e / SIL3
Modular safety solution
Ultra-compact enclosure

Technical Data
Product Documentation
Approvals
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 VAA-2E2A-CB10-SJ/E2J-FL

제품 설명
CB10 safety module, 2 safety-related inputs and 2 conventional electronic outputs

General specifications
Node type		Safety-Slave
AS-Interface specification		V3.0
Required gateway specification		≥ V2.1
UL File Number		E223772
Indicators/operating means
LED FAULT		error display; LED red red: communication error or address is 0
LED PWR		AS-Interface voltage; green LED green: voltage OK flashing green: address 0
LED IN		switching state (input); 2 LED yellow
LED OUT		Switching state (output); 2 LED yellow
Electrical specifications
Rated operating voltage		26.5 ... 31.6 V from AS-Interface (PELV)
Rated operating current		≤ 40 mA (without inputs/outputs)/max. 160 mA
Protection class		III
Surge protection		U_e: Over voltage category III, safe isolated power supplies (PELV)
Rated insulation voltage		32 V
Pulse withstand voltage		0.8 kV
Input
Number/Type		2 safety-related inputs for mechanical contacts, crossed-circuit monitored: 2 single-channel contacts: Up to category 2/PLc in accordance with ISO 13849-1 or SIL 1 in accordance with IEC 62061 1 two-channel contact: Up to category 4/PLe in accordance with ISO 13849-1 or SIL 3 in accordance with IEC 62061
Supply		from AS-Interface
Voltage		20 ... 30 V DC pulsed
Current		input current limited ≤ 15 mA, short-circuit protected
Output
Number/Type		2 conventional electronic outputs, PNP , overload and short-circuit resistant
Supply		from AS-Interface
Voltage		(U_ASI - 7.0 V) ≤ U_OUT ≤ U_ASI
Current		≤ 100 mA per output, ≤ 100 mA total
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	IEC 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007 EN 61326-1:2013
Machinery Directive
	Directive 2006/42/EC	EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015
Standard conformity
Degree of protection		EN 60529:2000
Fieldbus standard		EN 62026-2:2013
Electrical safety		IEC 61140:2009
Emitted interference		EN 61000-6-4:2007
AS-Interface		EN 62026-2:2013
Noise immunity		IEC 62026-2:2013 EN 61326-3-1:2017 EN 61000-6-2:2005
Functional safety		EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015
Programming instructions
Profile		S-7.B
IO code		7
ID code		B
ID1 code		F
ID2 code		0
Data bits (function via AS-Interface)		InputOutput
	D0	dyn. safety code 1 OUT 1
	D1	dyn. safety code 1 OUT 2
	D2	dyn. safety code 2 -
	D3	dyn. safety code 2 -
Parameter bits (programmable via AS-i)		function
	P0	not used
	P1	not used
	P2	not used
	P3	not used
Approvals and certificates
UL approval		Protection class IP20 is not included in the UL approval. The protection class is tested by Pepperl+Fuchs.
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		85 % , noncondensing
Climatic conditions		For indoor use only
Altitude		≤ 5000 m above MSL
Shock and impact resistance		30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks
Vibration resistance		0.35 mm 10 ... 57 Hz , 5 g 57 ... 2000 Hz, 10 cycles
Pollution degree		2
Mechanical specifications
Degree of protection		IP20 according to EN 60529
Connection		200 mm, PVC cable 0.5 mm²
Material
	Contacts	open conductor ends with connector sleeves
	Housing	Polyamide hot-melt adhesive
Mass		31 g
Dimensions
	Height	10.1 mm
	Width	36 mm
	Length	39.5 mm
Note		This device is maintenance-free. If the device is used in a manner not specified by the manufaturer, the protection provided by the device may be impaired.

Classifications

System	Classcode
ECLASS 13.0	27272603
ECLASS 12.0	27242604
ECLASS 11.0	27242604
ECLASS 10.0.1	27242604
ECLASS 9.0	27242604
ECLASS 8.0	27242604
ECLASS 5.1	27242604
ETIM 9.0	EC001599
ETIM 8.0	EC001599
ETIM 7.0	EC001599
ETIM 6.0	EC001599
ETIM 5.0	EC001599
UNSPSC 12.1	39121535

Details: VAA-2E2A-CB10-SJ/E2J-FL

Product Documentation: VAA-2E2A-CB10-SJ/E2J-FL

Brief Instructions	언어	파일 타입	파일 크기
Instruction leaflet / Beipackzettel	ALL	PDF	170 KB
Manuals
Manual VAA-2E*A-CB10-SJ/E2J-FL	ENG	PDF	986 KB

Approvals: VAA-2E2A-CB10-SJ/E2J-FL

Certificates	인증서 번호	언어	파일 타입	파일 크기
Functional Safety Certificate	968/FSP 2012.00/20	ALL	PDF	620 KB
US CA UL	E223772	ALL	LINK	---
Worldwide AS-International Association AS-Interface	134801	ALL	PDF	135 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4592B	ALL	PDF	214 KB