Serviceline Industrial Sensors
전문가 상담
Serviceline Explosion Protection
전문가 상담
방폭

Surge Protection Barrier FN-LB-I

FN-LB-I
  • 1-channel
  • Field mount module
  • ½ NPT thread
  • Stainless steel housing
  • Max. surge current (8/20 µs) 20 kA
  • 500 V isolation from earth
  • Suitable for hazardous area
  • Up to SIL 3 acc. to IEC/EN 61508

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:


데이타 시트 발췌: 기술 사양  FN-LB-I

General specifications
Number of protected signal lines1
Functional safety related parameters
Safety Integrity Level (SIL)SIL 3
Supply
Rated voltage≤ 48 V
Rated current≤ 250 mA
Leakage current≤ 5 µA
On-state voltage≤ 85 V
Ground insulation≥ 500 V breakdown voltage
Electrical specifications
Total discharge current (8/20 µs)20 kA
Conformity
Degree of protectionIEC 60529:2001
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F) For usage in hazardous area observe the EC-type examination certificate.
Mechanical specifications
Housing materialStainless steel 1.4401 (AISI 316)
surface all over polished
Degree of protectionIP67
Cable
Length0.3 m
Massapprox. 200 g
DimensionsAF22 x 77 mm (0.9 x 3 inch)
Length77 mm
Width across flats22
MountingNPT1/2 thread
Data for application in connection with hazardous areas
EU-type examination certificatePTB 00 ATEX 2175
MarkingEx-Hexagon II 2G EEx ia IIC T6
Voltage50 V
Maximum leakage current10 kA line to ground (common), 5 kA line to line (differential) in accordance to IEC 60-2
Nominal response time
Symmetrical1 ns
Asymmetric100 ns
Bandwidth≥ 40 kHz
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012
International approvals
CSA approval
Control drawing116-0187 (cCSAus)
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027171202
ECLASS 12.027171202
ECLASS 11.027130805
ECLASS 10.0.127130805
ECLASS 9.027130805
ECLASS 8.027130805
ECLASS 5.127130801
ETIM 9.0EC000941
ETIM 8.0EC000941
ETIM 7.0EC000941
ETIM 6.0EC000941
ETIM 5.0EC000941
UNSPSC 12.139121610

Details: FN-LB-I

Product Documentation: FN-LB-I

Language Selection:
Brief Instructions언어파일 타입파일 크기
Brief Instructions - Surge Protection BarriersENGPDF876 KB
Safety and Security Documentation
Instruction manualENGPDF157 KB
ManualENGPDF2244 KB
Manuals
Manual Surge Protection BarriersENGPDF1151 KB

Design / Simulation: FN-LB-I

Language Selection:
CAD언어파일 타입파일 크기
CAD 3-D / CAD 3-DALLSTP102 KB

Approvals: FN-LB-I

Language Selection:
Certificates인증서 번호언어파일 타입파일 크기
Canada, USA CSACoC 1128189ALLPDF62 KB
China SITIIAS CCC Ex Certificate2020322304002781 (Singapore)ALLPDF870 KB
Europe PTB ATEX Category 2 GPTB 00 ATEX 2175ALLPDF353 KB
exida Functional Safety AssessmentP+F 11-10-085 R036 V1R0ALLPDF477 KB
Control Drawings
Control drawing CSA / Control drawing CSA   ALLPDF179 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0969AALLPDF88 KB
General Notes Relating to Pepperl+Fuchs Product Information
Functional Safety Hub from Pepperl+Fuchs

Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.

페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국, 서울 특별시
대한민국
info@kr.pepperl-fuchs.com
phone +82 2 34819494

© 2024 All Rights Reserved.

Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.