General specifications |
Design / Mounting | Cabinet installation |
Installation in hazardous area | Zone 2 |
Fieldbus support | PROFIBUS PA |
Supply |
Rated voltage | 20 ... 60 V |
Rated current | 1.8 ... 0.6 A |
Power dissipation | max. 23 W |
Voltage difference dual supply input | +/- 10 % |
Power consumption | max. 36 W |
Redundancy | dual supply input |
Indicators/operating means |
LED PWR A/B | green: power on
|
LED LNK/CHK | Off: no communication link active , Green: communication link active , Green flashing: communication link activity , Yellow flashing: communication with PROFIBUS PA field device ,
Red flashing: check function |
LED STATUS | Off: Good ,
Blue: Maintenance required ,
Red: Failure
|
Fault signal | VFC alarm 100 mA, 32 V DC, normally closed |
Button | Device reset |
Interface 1 |
Interface type | Ethernet-APL : 1 Vpp option spur connection , PROFIBUS PA |
Port classification | S P A A |
Number of ports | 24 |
Port identification | S1...S24 |
Power option | powered |
Transfer rate | 10 MBit/s fullduplex |
Rated voltage | 9.6 V |
Rated current | 55.56 mA |
Rated power | 540 mW |
Cable shield grounding option | capacitive grounded |
Connection type | screw terminals , pluggable |
Conductor cross section | single wire/stranded wire: 0.2 ... 2.5 mm2 |
Conductor cross section solid wire | 2.08 ... 0.326 mm2 , 14 ... 18 AWG |
Conductor cross section flexible wire | 2.08 ... 0.326 mm2 , 14 ... 18 AWG |
Interface 2 |
Interface type | 1000BASE-T |
Number of ports | 2 |
Port identification | P 1 ... P 2 |
Transfer rate | 10/100/1000 Mbps |
Connection type | RJ-45 , EIA/TIA 568 B |
Interface 3 |
Interface type | Slot for SFP transceiver SFP Multi-Source (MSA) compliant |
Number of ports | 2 |
Port identification | P 3 ... P 4 |
Galvanic isolation |
Spurs/Supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
SFP/Supply | 620 V AC |
1000BASE-T/Supply | 1500 V AC |
1000BASE-T/Spurs | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
1000BASE-T/1000BASE-T | 1500 V AC |
Housing/All | 620 V AC |
Fault signal/All | 620 V AC |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 |
Conformity |
Galvanic isolation | IEC 61010-1 |
Electromagnetic compatibility | EN 61326 , NE 21 |
Degree of protection | IEC 60529 |
Ethernet | IEEE 802.3z , IEEE 802.3u , IEEE 802.3cg |
Shock resistance | EN 60068-2-27 |
Vibration resistance | EN 60068-2-6 |
Climatic conditions | DIN IEC 721 |
Software |
Industrial protocols | PROFINET , CC-B (PA) , dynamic reconfiguration , Netload Class III , pruning |
Management | Web user interface , SNMP v1, v2 , v3 , PROFINET |
Redundancy | PROFINET MRP , PROFINET system redundancy S2 |
Management Information Base (MIB) | PROFINET conformance class B |
Diagnostics function | 10BASE-T1L physical layer , port , Packet statistics , LLDP , PROFIBUS PA |
Cybersecurity |
Ambient conditions |
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) horizontally mounted no SFP installed -40 ... 65 °C (-40 ... 149 °F) horizontally mounted SFP installed |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Relative humidity | ≤ 95 % non-condensing |
Shock resistance | 15 g 11 ms |
Vibration resistance | 1 g 10 ... 150 Hz |
Pollution degree | max. 2, according to IEC 60664 |
Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications |
Housing material | stainless steel 1.4301 , Polycarbonate |
Degree of protection | IP20 |
Mass | 3826 g |
Dimensions | |
| Height | 158 mm |
| Width | 257 mm |
| Depth | 136.5 mm |
Mounting | DIN rail mounting , wall mounting |
Data for application in connection with hazardous areas |
EU-type examination certificate | TÜV 21 ATEX 8666 X |
| Marking | II 3 (1) G Ex ic ec [ia Ga] IIC T4 Gc II (1) D [Ex ia Da] IIIC |
Supply | |
| Maximum safe voltage | 60 V |
Interface 1 | 2-WISE power source, FISCO power supply |
| Voltage Uo | 17.5 V |
| Current Io | 380 mA |
| Power Po | 1.67 W |
| Capacitance Co | IIC : 0.25 µF IIB/IIIC : 1.5 µF |
| Inductance Lo | IIC : 0.15 mH IIB/IIIC : 0.5 mH |
Interface 2 | |
| Maximum safe voltage Um | 60 V |
Interface 3 | |
| Maximum safe voltage Um | 60 V |
Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 , IEC TS 60079-47:2021 |
International approvals |
IECEx approval | IECEx TUR 21.0072X |
| Approved for | Ex ic ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC |
Certificates and approvals |
Patents | This product may be covered by the following patent: US 9,762,409 |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |