Serviceline Industrial Sensors
Serviceline Explosion Protection

Display Unit DPU1200-J2-22F*

DPU1200-J2-22F*
  • 10 point multi-touch sensor option allows design of modern user interfaces
  • Highly resistant to cleaning agents with stainless steel bezel and seamless glass design
  • Design optimized for easy cleanability
  • Low-power consumption and heat dissipation due to LED backlight technology

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  DPU1200-J2-22F*

Product Description
Display Unit
Supply
Power consumptionaverage: 22 W
at maximum brightness: max. 27 W
Indicators/operating means
Display
TypeLC display with LED backlight Optically bonded
Screen diagonal54.61 cm (21.5 inch)
Resolution1920x1080 (Full HD) , Aspect ratio 16:9
Color depth16.7 Mio.
Contrast5000 (typical)
Brightness300 cd/m2 (nit)
Reading angle175° in all directions
Life spanback lamp life: 50.000 hrs typical half life , at 20 °C (68 °F)
Input devices
Touch screenoptional: projective capacitive, 10 finger multi-touch, glove-friendly
Interface
Interface typeinterface v1.0 from Pepperl+Fuchs for computing units from Pepperl+Fuchs
Bluetooth v4.0 , communication distance up to 30 m in open terrain (optional) , transmission power : +8 dBm
Transmitter frequency2.402 ... 2.48 GHz
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
non-Bluetooth products only
Radio and telecommunication terminal equipment
Directive 2014/53/EUEN 301 328 V2.1.1
EN 301 489-1 V2.1.1
EN 301 489-17 V3.1.1
Bluetooth products only
RoHS
Directive 2011/65/EU (RoHS)EN 50581:2012-09
Ambient conditions
Operating temperature0 ... 50 °C (32 ... 122 °F) (normal operation)
-20 ... 50 °C (-4 ... 122 °F) (after 1 hour of operation)
Storage temperature-20 ... 60 °C (-4 ... 140 °F)
Relative humidity93% at 40°C, non-condensating, according to EN 60068-2-78
Shock resistance18 shocks 15 g , 11 ms all axis, IEC 60068-2-27
Vibration resistance10 ... 150 Hz, +/- 0.075 mm , 1g, 10 cycles per axis according to EN60068-2-6
Mechanical specifications
Degree of protectionIP66 ( when mounted on the TCU or PCU from Pepperl+Fuchs )
Material
Surfacefront: glass (optional with stainless steel bezel)
Back side: powder coated aluminum
Massapprox. 11 kg
Dimensions624 mm x 458 mm x 35 mm
Cut out dimensions583 mm x 417 mm
Data for application in connection with hazardous areas
EU-type examination certificateBVS 16 ATEX E 081 X
MarkingEx-Hexagon II 3G Ex ec IIC T4 Gc
Ex-Hexagon II 3D Ex tc IIIC T80 °C Dc
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013, EN 60079-7:2015, EN 60079-31:2014
International approvals
IECEx approvalIECEx BVS 16.0061X
Approved forEx ec IIC T4 Gc
Ex tc IIIC T80 °C Dc
StandardsIEC 60079-0:2011, IEC 60079-7:2015, IEC 60079-31:2013

Classifications

SystemClasscode
ECLASS 13.027330201
ECLASS 12.027330201
ECLASS 11.027330201
ECLASS 10.0.127330201
ECLASS 9.027330201
ECLASS 8.027339090
ECLASS 5.127242402
ETIM 9.0EC001428
ETIM 8.0EC001428
ETIM 7.0EC001428
ETIM 6.0EC001428
ETIM 5.0EC001428
UNSPSC 12.139121106

Details: DPU1200-J2-22F*

Function

The DPU1200-J2-22F* display unit is an ATEX/IECEx certified device intended for use in Zone 2/22 hazardous areas.

Connected to a Pepperl+Fuchs thin client unit or PC unit, the DPU serves as a display with an optional touchscreen. It enables users to perceive the system outputs of the computing unit and to input user data.

Five system keys located on the front of the unit allow users to control system functions of the display unit (e. g., brightness control) and the computing unit (e. g., home key). Integrated signal lights on the front keys show selected failure modes in case of a defective component.

The display unit is optimized for use with the modular HMI components of the VisuNet GXP product line: TCU1200-* thin client unit,
PCU1200-* PC unit, and PSU1200-* power supply unit.

Product Documentation: DPU1200-J2-22F*

Language Selection:
Safety and Security DocumentationLanguageFile TypeFile Size
Instruction manualENGPDF174 KB
Manuals
Manual DPU1100-* / DPU1200-*ENGPDF5243 KB

Approvals: DPU1200-J2-22F*

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
China SITIIAS CCC Ex Certificate2020322309003367 (Singapore)ALLPDF2219 KB
EU DEKRA EXAM ATEX Category 3 D ATEX Category 3 GBVS 16 ATEX E 081 XALLPDF19457 KB
IECEx Certificate of ConformityIECEx BVS 16.0061XALLLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3337DALLPDF231 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3096FALLPDF242 KB

Associated Products: DPU1200-J2-22F*

Accessory of
VisuNet GXP Remote Monitor Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, Thin Client solution (with VisuNet RM Shell firmware), Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22pa
VisuNet GXP PC Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, PC solution with pre-installed Windows® operating system, Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22pa
Accessories
AC Power Supply, Certified for ATEX and IECEx Zone 2/22, Galvanic isolation between input and output, Provides an output power up to 80 W at 24 V DC, Fully IP66 ratedpa
DC Power Supply, Certified for ATEX and IECEx Zone 2/22, Galvanic isolation between input and output, Provides an output power up to 80 W at 24 V DC, Fully IP66 ratedpa
Thin Client Unit, Modular, lightweight design, Low-power design with minimal heat dissipation, VisuNet RM Shell installed, High connectivity flexibility due to multiple interface options, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canada, IP66pa
Personal Computer Unit (PCU), Modular, lightweight design, Low-power design with minimal heat dissipation, High connectivity flexibility due to multiple interface options, Powerful Intel® Atom Apollo Lake processor, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canada, IP66pa