UC500-30GM70-2E2R2-V15-Y Ultrasonic sensor

Key Benefits at a Glance

2 switch outputs
Synchronization options
Temperature compensation
Can be parameterized via the ULTRA-PROG-IR software and interface (accessories)
Customer-specific configuration

Product photo: Ultrasonic sensor UC500-30GM70-2E2R2-V15-Y

Dimensions: Ultrasonic sensor UC500-30GM70-2E2R2-V15-Y

Connection Assignment: Ultrasonic sensor UC500-30GM70-2E2R2-V15-Y

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE

DE
EN
ES
FR

Datasheet Classification Product Documentation Approvals Software Related Products

Technical data of UC500-30GM70-2E2R2-V15-Y

Ultrasonic direct detection sensor

Sensing range		45 ... 500 mm
Adjustment range		50 ... 500 mm
Dead band		0 ... 45 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 300 kHz
Response delay		≤ 60 ms

Temperature drift		≤ ± 1.5 % of full-scale value
Time delay before availability	t_v	≤ 85 ms

Permissible cable length

max. 300 m

LED yellow		solid Switching state switch output 1
LED green/yellow		yellow: switching state switch output 2 green: Teach-In
Potentiometer		Switching output 1 and Switching output 2 adjustable

Rated operating voltage	U_e	24 V DC
Operating voltage	U_B	12 ... 30 V DC (including ripple)
Ripple		≤ 10 %
No-load supply current	I₀	≤ 50 mA

Interface type		Infrared
Mode		point-to-point connection

Input/output type

1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input

0 Level		≤ 3 V
1 Level		≥ 15 V
Input impedance		typ. 900 Ω
Number of sensors		max. 10

Output type		2 switch outputs PNP, NC ( NO contact programmable )
Default setting		50 ... 500 mm ( adjustable via potentiometer )
Repeat accuracy	R	± 0.5 mm
Operating current	I_L	per 150 mA , short-circuit/overload protected
Switching frequency		≤ 5 Hz
Switching hysteresis		5 mm ( programmable )
Voltage drop		≤ 3 V
Off-state current		≤ 10 µA

Standard conformity

Standards

EN IEC 60947-5-2:2020
IEC 60947-5-2:2019

UL approval		cULus Listed, Class 2 Power Source
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Shock resistance		30 g , 11 ms period
Vibration resistance		10 ... 55 Hz , Amplitude ± 1 mm

Connection type

Connector plug M12 x 1 , 5-pin

Degree of protection

IP65

Material

Housing		brass, nickel-plated
Transducer		epoxy resin/hollow glass sphere mixture; polyurethane foam

Installation position

any position

Mass

140 g

Dimensions

Length		99.3 mm
Diameter		30 mm

Construction type

Cylindrical

Output 1		Normally closed (NC)
Output 2		Normally closed (NC)

General Notes