Select Your Country

Go to global website

  1. sv
  2. Products
  3. Hazardous Area Products and Solutions
  4. Sensors for Hazardous Areas
  5. Inductive Sensors
  6. NCB10-30GM40-N0-10M-OG

NCB10-30GM40-N0-10M-OG Inductive sensor

Key Benefits at a Glance

  • 10 mm flush
  • NAMUR output
  • Polarity reversal protected
  • Stainless steel housing
  • Shielded PUR cable for oil and gas sector

Show more

Contact us
Product photo: Inductive sensor NCB10-30GM40-N0-10M-OG
Dimensions: Inductive sensor NCB10-30GM40-N0-10M-OG
Product photo: Inductive sensor NCB10-30GM40-N0-10M-OG
Dimensions: Inductive sensor NCB10-30GM40-N0-10M-OG
Approval
Approval
Product Compliance: Europe – CE
Product Compliance: USA - cULus
Product Compliance: United Kingdom – UKCA
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

SV
  • CS
  • DE
  • EN
  • ES
  • FR
  • IT
  • PL
  • PT
  • SV
DatasheetClassificationProduct DocumentationDesign / SimulationApprovalsRelated Products

Technical data of NCB10-30GM40-N0-10M-OG

Switching functionNormally closed (NC)
Output typeNAMUR
Rated operating distancesn10 mm
Installationflush
Assured operating distancesa0 ... 8.1 mm
Actual operating distancesr9 ... 11 mm typ.
Reduction factor rAl 0.32
Reduction factor rCu 0.32
Reduction factor r304 0.72
Output type3-wire
Nominal voltageUo8.2 V (Ri approx. 1 kΩ)
Switching frequencyf0 ... 650 Hz
HysteresisH1 ... 10 % typ. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionyes
Suitable for 2:1 technologyyes , Reverse polarity protection diode not required
Current consumption
Measuring plate not detectedmin. 3 mA
Measuring plate detected≤ 1 mA
Switching state indicatorLED, yellow
MTTFd1870 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Standard conformity
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
StandardsEN IEC 60947-5-2
IECEx approval
Equipment protection level GaIECEx PTB 11.0037X
Equipment protection level GbIECEx PTB 11.0037X
Equipment protection level DaIECEx PTB 11.0037X
Equipment protection level MbIECEx PTB 11.0037X
ATEX approval
Equipment protection level GaPTB 00 ATEX 2048 X
Equipment protection level GbPTB 00 ATEX 2048 X
Equipment protection level DaPTB 00 ATEX 2048 X
UL approval
Ordinary LocationE87056
Hazardous LocationE501628
Control drawing116-0452
CML approvalon request
ANZEx18.3018X
Ambient temperature-25 ... 80 °C (-13 ... 176 °F)
Storage temperature-40 ... 80 °C (-40 ... 176 °F)
Connection typecable
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Degree of protectionIP66 / IP67
Cable
Wire end ferrulesyes
Cable diameter6.7 mm ± 0.3 mm
Bending radius> 7.5 x cable diameter
MaterialPUR
Colorblue
Number of cores2
Core cross section0.5 mm2
LengthL10 m
Dimensions
Length40 mm
Diameter30 mm
NoteThe shield is not connected to the sensor.
Use in the hazardous areasee instruction manuals
General Notes