GLV30-LL-1227/40a/53/92 Diffuse mode sensor

Key Benefits at a Glance

M30 nickel plated brass threaded housing
Light-on/dark-on switching
For glass fibre light guide
Extensive fiber optic product selection as accessories

Product photo: Diffuse mode sensor GLV30-LL-1227/40a/53/92

Dimensions: Diffuse mode sensor GLV30-LL-1227/40a/53/92

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE

DE
EN
ES
FR
ZH

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of GLV30-LL-1227/40a/53/92

Diffuse mode sensor

Detection range		without fiberoptic cable : 0 ... 1700 mm , with fiberoptic cable see selection table for fiberoptic cables
Adjustment range		250 ... 1700 mm (on use without fiberoptics)
Reference target		standard white 200 mm x 200 mm (only for retroreflective fiberoptic cables)
Light source		IRED
Light type		modulated infrared light
Diameter of the light spot		approx. 400 mm at 1700 mm sensor range
Opening angle		approx. 15 °
Ambient light limit		50000 Lux

Function indicator		LED yellow, lights up with receiver lit
Control elements		Sensitivity adjuster, light/dark switch

Operating voltage	U_B	10 ... 30 V DC
Ripple		10 %
No-load supply current	I₀	40 mA

Switching type		light/dark on
Signal output		1 PNP, not short-circuit protected
Switching voltage		max. 30 V DC
Switching current		max. 500 mA
Response time		2 ms
De-energized delay	t_off	7 ms

Product standard

EN 60947-5-2

UL approval		cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 75 °C (-4 ... 167 °F)

Degree of protection

IP65

Connection

4-pin, M12 metal connector

Material

Housing		brass, nickel-plated
Optical face		glass

Mass

370 g

General Notes