NCN25-30GM50-Z5 Inductive sensor

Key Benefits at a Glance

25 mm non-flush
2-wire DC
Increased operating distance

Product photo: Inductive sensor NCN25-30GM50-Z5

Dimensions: Inductive sensor NCN25-30GM50-Z5

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

SV

CS
DE
EN
ES
FR
IT
PL
PT
SV
ZH

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NCN25-30GM50-Z5

Switching function		Normally closed (NC)
Output type		Two-wire
Rated operating distance	s_n	25 mm
Installation		non-flush
Output polarity		DC
Assured operating distance	s_a	0 ... 20 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.7
Reduction factor r_Brass		0.5
Output type		2-wire

Operating voltage	U_B	3.5 ... 30 V
Switching frequency	f	500 Hz
Reverse polarity protection		reverse polarity-conductive
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 3.5 V
Temperature drift		± 15%
Operating current	I_L	2 ... 100 mA
Off-state current	I_r	typ. 0.8 mA
Switching state indicator		LED, yellow

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)

Connection type

cable

Housing material

brass, nickel-plated

Sensing face

PBT

Degree of protection

IP67

Cable

Wire end ferrules		yes
Cable diameter		4.8 mm ± 0.2 mm
Bending radius		> 10 x cable diameter
Material		PVC
Color		grey
Number of cores		2
Core cross section		0.34 mm²
Length	L	2 m

Dimensions

Length		48 mm
Diameter		30 mm

General Notes