NBB15-30GM60-B3B-V1 Inductive sensor

Key Benefits at a Glance

15 mm flush
Cylindrical
A/B node with extended addressing possibility for up to 62 nodes
NO/NC selectable
On/Off delay (disconnectable)

In stock1 637,00 SEK

Product photo: Inductive sensor NBB15-30GM60-B3B-V1

Dimensions: Inductive sensor NBB15-30GM60-B3B-V1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NBB15-30GM60-B3B-V1

AS-Interface

Switching function		Normally open/closed (NO/NC) programmable
Output type		AS-Interface
Rated operating distance	s_n	15 mm
Installation		flush
Assured operating distance	s_a	0 ... 12.15 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.7
Reduction factor r_Brass		0.5
Node type		A/B node
AS-Interface specification		V3.0
Required gateway specification		≥ V2.1
Output type		2-wire

Operating voltage	U_B	26.5 ... 31.9 V via AS-i bus system
Switching frequency	f	0 ... 200 Hz
Hysteresis	H	1 ... 15 % typ. 5 %
Reverse polarity protection		reverse polarity protected
No-load supply current	I₀	≤ 25 mA
Switching state indicator		dual-LED, yellow
Error indicator		dual-LED, red

MTTF_d		1700 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Connection type

Connector plug

Housing material

brass, nickel-plated

Sensing face

PBT

Degree of protection

IP67

Connector

Threading		M12 x 1
Number of pins		4

Dimensions

Length		65 mm
Diameter		30 mm

General Notes