NEN40-30GM60-E0 Inductive sensor

Key Benefits at a Glance

40 mm non-flush
Increased operating distance

Please contact us for exact delivery estimation.1 764,00 SEK

Product photo: Inductive sensor NEN40-30GM60-E0

Dimensions: Inductive sensor NEN40-30GM60-E0

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NEN40-30GM60-E0

Switching function		Normally open (NO)
Output type		NPN
Rated operating distance	s_n	40 mm
Installation		non-flush
Output polarity		DC
Assured operating distance	s_a	0 ... 32.4 mm
Reduction factor r_Al		0.42
Reduction factor r_Cu		0.37
Reduction factor r₃₀₄		0.78
Output type		3-wire

Installation conditions

A		in aluminum: 25 mm in steel 1.0037 (St37): 35 mm in brass 25 mm in stainless steel 20 mm
B		55 mm
C		120 mm
F		150 mm

Operating voltage

U_B

10 ... 30 V

Switching frequency

f

0 ... 100 Hz

Hysteresis

H

≤ 10 %

Reverse polarity protection

reverse polarity protected

Short-circuit protection

pulsing

Voltage drop

U_d

≤ 2 V

Operating current

I_L

0 ... 200 mA

Off-state current

I_r

0 ... 0.1 mA typ. 0.1 µA at 25 °C

No-load supply current

I₀

≤ 10 mA

Switching state indicator

LED, yellow

MTTF_d		211 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

Standards

EN IEC 60947-5-2

CCC approval

CCC approval / marking not required for products rated ≤36 V

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Connection type

cable PVC , 2 m

Core cross section

0.34 mm²

Housing material

chromium plated brass

Sensing face

PBT

Degree of protection

IP67

Dimensions

Length		60 mm
Diameter		30 mm

General Notes