NBB15-30GM50-EI-V1-M1 Inductive sensor

Key Benefits at a Glance

15 mm flush
Extended temperature range
-40 ... +85 °C
Digital current output
E1-Type approval

Product photo: Inductive sensor NBB15-30GM50-EI-V1-M1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

SV

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NBB15-30GM50-EI-V1-M1

Output type		Digital current output
Rated operating distance	s_n	15 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 12.15 mm
Actuating element		mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 45 mm x 45 mm x 1 mm
Reduction factor r_Al		0.5
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.7
Reduction factor r_Brass		0.5
Output type		3-wire

Operating voltage	U_B	9 ... 30 V DC
Switching frequency	f	0 ... 700 Hz
Hysteresis	H	2 ... 15 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		yes
Temperature drift		≤ 10 %
Time delay before availability	t_v	≤ 5 ms
Load resistor		100 ... 250 Ohm
Switching state indicator		LED, yellow

MTTF_d		1556 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Output value

object detected: 10 mA ± 1 mA
object not detected: 5 mA ± 1 mA

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose, Class 2 Power Source
E1 Type approval		10R-04

Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Connection type

Connector plug

Housing material

brass, nickel-plated

Sensing face

PBT

Degree of protection

IP68 / IP69K

Connector

Threading		M12 x 1
Number of pins		3

Mass

140 g

Dimensions

Length		65 mm
Diameter		30 mm

Scope of delivery

2 self locking nuts in scope of delivery

General Notes