NBB10-30GS50-Z4L-V1 Inductive sensor

Key Benefits at a Glance

10 mm flush
2-wire DC sensor with minimum off-state current
Switching status indicator, yellow LED
Stainless steel housing

Product photo: Inductive sensor NBB10-30GS50-Z4L-V1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

SV

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NBB10-30GS50-Z4L-V1

Switching function		Normally open (NO)
Output type		Two-wire with minimum off-state current
Rated operating distance	s_n	10 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 8.1 mm
Actual operating distance	s_r	9 ... 11 mm typ.
Reduction factor r_Al		0.32
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.66
Output type		2-wire

Operating voltage	U_B	4 ... 30 V
Switching frequency	f	0 ... 150 Hz
Hysteresis	H	1 ... 10 % typ. 5 %
Reverse polarity protection		yes
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 4 V
Operating current	I_L	2 ... 30 mA
Lowest operating current	I_m	2 mA
Off-state current	I_r	≤ 200 µA
Switching state indicator		Multihole-LED, yellow

MTTF_d		1536 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose, Class 2 Power Source
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Connection type

Connector plug

Housing material

Stainless steel 1.4305 / AISI 303

Sensing face

PBT

Degree of protection

IP67

Connector

Threading		M12 x 1
Number of pins		2

Mass

148 g

Dimensions

Length		66 mm
Diameter		30 mm

Scope of delivery

2 self locking nuts in scope of delivery

General Notes