工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊
工業感測器

暂不可售

此產品已經被替換前往替換產品資訊 VDM28-8-L1-IO/33/110/115b/122
暂不可售
暂不可售

Distance sensor VDM28-8-L-IO/33/110/115b/122

VDM28-8-L-IO/33/110/115b/122
  • Distance measurement using object
  • Measuring method PRT (Pulse Ranging Technology)
  • Accurate, clear, and reproducible measuring results
  • Minimal black-white difference
  • Red laser as the light emitter
  • Version with IO-Link interface
  • Version with analog output
  • Version with laser class 2

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

產品規格摘要：的技術資料  VDM28-8-L-IO/33/110/115b/122

產品描述
Universal distance sensor, measurement to object, IO-Link interface, measuring method PRT, 8 m detection range, red laser light, laser class 2, push-pull output, analog output, fixed cable with M12 plug
General specifications
Measurement range0.2 ... 8 m
Reference targetKodak white (90%)
Light sourcelaser diode
typ. service life 85,000 h at Ta = +25 °C
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class2
Wave length660 nm
Beam divergence1 mrad
Pulse length5 ns
Repetition rate250 kHz
max. pulse energy< 4 nJ
Angle deviationmax. ± 2°
Measuring methodPulse Ranging Technology (PRT)
Diameter of the light spot< 10 mm at a distance of 8 m at 20 °C
Ambient light limit50000 Lux
Temperature influencetyp. ≤ 0.25 mm/K
Functional safety related parameters
MTTFd200 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Function indicator2 LEDs yellow for switching state
Teach-in indicatorTeach-In: LED green/yellow equiphase flashing; 2.5 Hz
Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
Control elements5-step rotary switch for operating modes selection (threshold setting and operating modes)
Control elementsSwitch for setting the threshold values
Electrical specifications
Operating voltage10 ... 30 V DC / when operating in IO-Link mode: 18 ... 30 V
Ripple10 % within the supply tolerance
No-load supply current≤ 70 mA / 24 V DC
Time delay before availability1.5 s
Interface
Interface typeIO-Link
ProtocolIO-Link V1.0
Cycle timemin. 2.3 ms
ModeCOM2 (38.4 kBit/s)
Process data width16 bit
SIO mode supportyes
Output
Signal outputPush-pull output, short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Measurement output1 analog output 4 ... 20 mA, short-circuit/overload protected
Switching frequency50 Hz
Response time10 ms
Conformity
Product standardEN 60947-5-2
Laser safetyIEC 60825-1:2007
Measurement accuracy
Absolute accuracy± 25 mm
Repeat accuracy< 5 mm
Approvals and certificates
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature-30 ... 50 °C (-22 ... 122 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Mechanical specifications
Degree of protectionIP65
Connectionfixed cable 150 mm with M12 x 1 male connector, 4 pin
Material
HousingPlastic ABS
Optical facePMMA
Mass90 g
Dimensions
Height88 mm
Width25.8 mm
Depth54.6 mm

Classifications

SystemClasscode
ECLASS 13.027270916
ECLASS 12.027270916
ECLASS 11.027270801
ECLASS 10.0.127270801
ECLASS 9.027270801
ECLASS 8.027270801
ECLASS 5.127270801
ETIM 9.0EC001825
ETIM 8.0EC001825
ETIM 7.0EC001825
ETIM 6.0EC001825
ETIM 5.0EC001825
UNSPSC 12.141111613

Details: VDM28-8-L-IO/33/110/115b/122

Datasheet: VDM28-8-L-IO/33/110/115b/122

Datasheet檔案類型檔案尺寸
Datasheet VDM28-8-L-IO/33/110/115b/122PDF1713 KB
Fiche de données VDM28-8-L-IO/33/110/115b/122PDF1722 KB
Datenblatt VDM28-8-L-IO/33/110/115b/122PDF1715 KB
Hoja de datos VDM28-8-L-IO/33/110/115b/122PDF1728 KB

CAD+CAE: VDM28-8-L-IO/33/110/115b/122

CAD檔案類型檔案尺寸
CAD 3-D / CAD 3-DSTP1711 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: VDM28-8-L-IO/33/110/115b/122

Certificates檔案類型檔案尺寸
Canada USA UL Ordinary LocationLINK---
EU Pepperl+FuchsPDF503 KB
IO-Link Manufacturer DeclarationPDF275 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)PDF308 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)PDF297 KB

Software: VDM28-8-L-IO/33/110/115b/122

Device type managers (DTM)檔案類型檔案尺寸
Device DTM for VDM28 IO-Link sensors / Geräte-DTM für VDM28 IO-Link SensorenZIP4937 KB
IO Device Description (IODD)
IODD for VDM28-8-L / -15-L / IODD für VDM28-8-L / -15-LZIP154 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolZIP96138 KB

相關產品: VDM28-8-L-IO/33/110/115b/122

Accessories
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting bracket: mounting aid for sensors in the RL* seriesfa
Mounting aid for RL* seriesfa
Metal enclosure for inserting protective panes or aperturesfa
Mounting and fine adjustment device for sensors from the 28 seriesfa
Mounting bracket for rear wall mountingfa
dove tail mounting clampfa
dove tail mounting clampfa
EtherNet/IP IO-Link master with 8 inputs/outputsfa
PROFINET IO IO-Link master with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Ethernet IO-Link module with 8 inputs/outputsfa
Ethernet IO-Link module with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa
Protective enclosure, Explosion-proof housing, Approved for Class I, Groups C, D, Approved for Class II, Groups E, F and G, Internal terminal block and 4-pin M12 plug angledfa
Mounting aid for VDM28 seriesfa
General Notes Relating to Pepperl+Fuchs Product Information

了解 SmartRunner 激光轮廓传感器，将线性光列阵技术与集成 LED 的 2-D 视觉传感器独特地结合在一起……

R2300 系列将四个扫描平面集成到一个 LiDAR 传感器中。与单层设备相比，它可以进行 3D 扫描，从而提供更可靠的测量结果。了解有关其优势、用例和技术的更多信息 ……

R10x 和 R20x 系列光電感測器

首次將光電感測器和創新技術包含在同一外殼中，為使用者帶來一致的解決方案。瞭解新型 R10x 和 R20x 系列……

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市 臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

© 2024 版權所有

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證