Read/write station IPT1-FP

With integrated control interface unit
Serial interfaces and field-bus interfaces selectable through lower part
Read distance of up to 100 mm
Write distance of up to 50 mm
3 LEDs for function indication
Degree of protection IP67
Optimized reading speed for fixed codes
Suited for writing of IPC11

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Produits associés
Vous sollicitez un expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:

Caractéristiques techniques IPT1-FP

Description produit
LF R/W system, fully assembled as configuration and test station

General specifications
Operating frequency		125 kHz
Transfer rate		2 kBit/s
Operating distance		maximum: 100 mm
UL File Number		E87056
Indicators/operating means
LED green		Power on
LED yellow		IPC detected
LED red		bus fault (when using fieldbus interfaces)
Electrical specifications
Rated operating voltage		20 ... 30 V DC , ripple 10 %_SS , PELV
Power consumption		max. 5 W , in connection with the base
Galvanic isolation
	Operating voltage/interface	functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V_eff
Mag. Field strength		< 27.3 dBµA/m at 10 m
Interface
Physical		Interface type depends on base used
Directive conformity
Radio equipment
	Directive 2014/53/EU	EN 301489-1 EN 300330 EN 62368-1
RoHS
	Directive 2011/65/EU (RoHS)	IEC/EN 63000
Standard conformity
RFID		ISO/IEC 18000-2
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protection		IP67 according to EN 60529, with base
Material
	Housing	PBT

Classifications

System	Classcode
ECLASS 13.0	27280401
ECLASS 12.0	27280401
ECLASS 11.0	27280401
ECLASS 10.0.1	27280401
ECLASS 9.0	27280401
ECLASS 8.0	27280401
ECLASS 5.1	27280401
ETIM 9.0	EC002998
ETIM 8.0	EC002998
ETIM 7.0	EC002998
ETIM 6.0	EC002998
ETIM 5.0	EC002998
UNSPSC 12.1	43211710

Details: IPT1-FP

Fonction

La station de lecture/écriture IPT1-FP est utilisée en combinaison avec une base contenant l'interface de connexion à un ordinateur. Selon la base choisie, vous pouvez sélectionner des interfaces séries ou à bus de terrain.

Le système d'analyse est intégré dans l'appareil et simplifie la construction du système. La classe de protection IP67 permet d'installer l'appareil directement sur le terrain.

Informative Literature: IPT1-FP

Literature	Langue	Type de fichier	Taille
Application Report - RFID Systems in Industrial Metal Stamping	ENG	PDF	1773 KB

Product Documentation: IPT1-FP

Brief Instructions	Langue	Type de fichier	Taille
Brief Instructions - IPT-FP & U-P / Kurzanleitung - IPT-FP & U-P	ALL	PDF	7754 KB
Manuals
Manual IPTx-FP with U-P6-B5	ENG	PDF	2421 KB
Manual IPTx-FP with U-P6-B5-V	ENG	PDF	2021 KB
Manual IPTx-FP with U-P6-R4	ENG	PDF	1272 KB
Manual IPTx-FP with U-P6x-B6x	ENG	PDF	2364 KB
Manual IPTx-FP with U-P7V4A-R4	ENG	PDF	1263 KB
Manual IPTx-FP with U-Px-R4	ENG	PDF	1158 KB
Manual IPTx-FP with U-Px-R4-V15	ENG	PDF	1139 KB
Manual IPTx-FP with U-Px-RX	ENG	PDF	1748 KB

Design / Simulation: IPT1-FP

CAD	Langue	Type de fichier	Taille
CAD 3-D / CAD 3-D	ALL	STP	254 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: IPT1-FP

Certificates	Identification	Langue	Type de fichier	Taille
Canada, USA UL	CoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0	ALL	PDF	561 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3522A	ALL	PDF	161 KB
Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung		ALL	PDF	61 KB

Produits associés : IPT1-FP

Matching System Components

	U-P3-RX Base for read/write station
	Base with serial interfaces RS 232 and RS 485fa

	U-P3-R4 Base for read/write station
	Base with addressable serial Interface RS 485fa

	U-P3-R4-V15 Base for read/write station, plug-in connection
	Base with addressable serial Interface RS 485fa

	U-P6-B5 Base for read/write station
	Base for INTERBUSfa

	U-P6-B5-V Base for read/write station
	Base for INTERBUS, plug-in connectionfa

	U-P6-B6 Base for read/write station
	Base for PROFIBUS DPfa

	U-P6-B6-V15B Base for read/write station
	Base for PROFIBUS DP, plug-in connectionfa

	U-P6V4A-B6 Base for read/write station, stainless steel version
	Base for PROFIBUS DP, stainless steel versionfa

	U-P3V4A-RX Base for read/write station, stainless steel version
	Base with serial interfaces RS 232 and RS 485, stainless steel version V4Afa

Remarques générales sur les informations produit de Pepperl+Fuchs

RFID Read/Write Head IUT-F190-B40 with Industrial Ethernet Interface and REST API

NOUVEAU\~: UHF Read/Write Head with Integrated Industrial Ethernet Interface and REST API

Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …

Visitez le Hub RFID

Visitez notre « Hub RFID » : ce site Internet spécial constitue une base de connaissances de la RFID. Obtenez des réponses aux questions fréquemment posées et découvrez les applications RFID types…

Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
phone +32 3 644 25 00

Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.