Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Téléchargez ici la fiche technique complète en PDF:
Description produit | ||
---|---|---|
Module Ethernet IO-Link avec 8 entrées/sorties |
Caractéristiques générales | ||
---|---|---|
numéro de fichier UL | E223772 | |
Eléments de visualisation/réglage | ||
Affichage LED | voir manuel | |
Commutateurs | Configuration du protocole de bus de terrain | |
Caractéristiques électriques | ||
Tension assignée d'emploi | 18 ... 30 V | |
Tension assignée d'emploi | 24 V CC | |
Consommation en courant | typ. 200 mA | |
intensité de courant maximal admissible | Max. 2 x 16 A par module (Courant en boucle via l'alimentation à codage L) Courant total : max. 9 A par module |
|
Séparation galvanique | entre US et UL | |
Interface 1 | ||
Type d'interface | Ethernet industriel | |
Physique | M12, codage D | |
Protocole | PROFINET IO avec protocole MRP (Media Redundancy Protocol) EtherNet/IP avec DLR (Device Level Ring) |
|
Vitesse de transfert | 10/100 Mbps | |
Entrées/sorties | ||
nombre/type | 4 x IO-Link, classe A (X1 – X4) 4 x IO-Link, classe B (X5 – X8) Configurable en tant que : 8 IO-Link et 4 entrées et sorties numériques max. 12 entrées numériques et 4 sorties numériques max. 12 sorties numériques et 4 entrées numériques max. protégé(e)((s)) contre les courts-circuits |
|
alimentation capteur | max. 500 mA Par port (X1 - X8) Via L+ (broche 1) | |
Courant de sortie | max. 500 mA Par port (X1 - X8) Via C/Q (broche 4) En plus, un maximum de 2 A par port (X5 - X8) Via UAux (broche 2) |
|
Conformité aux directives | ||
Compatibilité électromagnétique | ||
Directive CEM selon 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 | |
Conformité aux normes | ||
Degré de protection | EN 60529:2000 | |
norme de bus de terrain | Type 1 selon la norme CEI 61131-2 | |
Emission d'interférence | EN 61000-6-4:2007+A1:2011 | |
Immunité | EN 61000-6-2:2005 | |
Résistance aux chocs | EN 61131-2:2004 | |
Conditions environnantes | ||
Température ambiante | -20 ... 70 °C (-4 ... 158 °F) | |
Température de stockage | -40 ... 70 °C (-40 ... 158 °F) | |
Température de démarrage à froid | -40 °C (-40 °F) | |
Humidité rel. de l'air | max. 95 % | |
Hauteur d'utilisation | 0 ... 2000 m | |
Tenue aux chocs et aux vibrations | 50 g, 11 ms, tous axes | |
Résistance aux vibrations | 15 g à 5 - 500 Hz | |
Degré de pollution | 3 | |
Caractéristiques mécaniques | ||
éléments de contact | PA | |
Degré de protection | IP65/IP67/IP69K | |
Raccordement | Alimentation M12, codage L Bus de terrain M12, codage D Entrées / sorties M12, codage A |
|
Matérial | ||
contacts | CuSn, doré CuNi, doré |
|
Boîtier | zinc moulé sous pression | |
joint d'étanchéité | FKM | |
Masse | 500 g | |
Couple de serrage des vis de fixation | 1 Nm | |
Presse-étoupe de vis de fixation | max. 0,5 Nm | |
Forme constructive | Boîtier de terrain | |
Couple de serrage des vis d'arrêt | 0,5 Nm |
Manuels | Langue | Type de fichier | Taille |
---|---|---|---|
Manual ICE1-8IOL-G60L-V1D | ENG | 5141 KB | |
Handbuch ICE1-8IOL-G60L-V1D | GER | 7373 KB | |
Manuels d'instructions | |||
Safety reference / Sicherheitshinweis | ALL | 20 KB |
CAD | Type de fichier | Taille | |
---|---|---|---|
3-D model in IGS format / 3-D-Modell im IGS-Format | IGS | 31032 KB | |
3-D model in STP format / 3-D-Modell im STP-Format | STP | 12400 KB | |
CAD Portal / CAD Portal | LINK | --- | |
EPLAN | |||
EPLAN Data Portal / EPLAN Data Portal | LINK | --- | |
EPLAN macro P+F.ICE1-8IOL-G60L-V1D / EPLAN-Makro P+F.ICE1-8IOL-G60L-V1D | EDZ | 71 KB |
Attestations de conformité | Identification | Type de fichier | Taille |
---|---|---|---|
EU-Declaration of conformity / EU-Konformitätserklärung | DOC-3185A | 162 KB | |
Certificats | |||
ODVA Ethernet/IP | File No. 11612.01 | 69 KB | |
PNO V | Z11881 | 299 KB | |
US CA UL | E223772 | LINK | --- |
Exemples de mise en service | Langue | Type de fichier | Taille |
---|---|---|---|
Commissioning with the IO-Link Device Tool by TMG | ENG | 774 KB | |
Inbetriebnahme mit dem IO-Link Device Tool von TMG | GER | 777 KB | |
Fichiers de mise en service | |||
Add-On Instructions for RSLogix/Studio 5000. The reading and writing of Parameters to IQT RFID Heads, VDM28, OQT*R10x, OMT*R10x, OBT*R10x, OBR*R10x, OBG*R10x, and OBD*R10x. Process Data displayed for OMT*R10x and VDM28 sensors as well as IQT RFID Heads. / Inbetriebnahme-Datei_a | ALL | ZIP | 56719 KB |
Commissioning IO-Link-Parameterization for TIA Portal V15 / Inbetriebnahme IO-Link-Parametrierung für TIA Portal V15 | ALL | ZIP | 1409 KB |
Pilote de l'appareil | Parution | Type de fichier | Taille |
---|---|---|---|
Description files for use with Ethernet/IP Protocol and RSLogix 5000 / Studio 5000 V20 or higher / Beschreibungsdateien für EtherNet/IP und RSLogix 5000 / Studio 5000 | 05/2019 | ZIP | 13620 KB |
EtherNet/IP EDS-Files / EtherNet/IP EDS-Dateien | 04/2019 | ZIP | 73 KB |
PROFINET GSDML-Files / PROFINET GSDML-Dateien | 03/2019 | ZIP | 66 KB |
Outils logiciels | |||
IOLM (IO-Link Master Description) for the IO-Link Device Tool from TMG TE / IOLM (IO-Link Master Description) für das IO-Link Device Tool von TMG TE | 2019-02 | ZIP | 58 KB |
Accessoires de | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Accessoires | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|