OBR15M-R200-A5-IO-V1 Retroreflective sensor with polarization filter

Key Benefits at a Glance

Medium design with versatile mounting options
Extended temperature range
-40 °C ... 60 °C
High degree of protection IP69K
IO-Link interface for service and process data

Please contact us for exact delivery estimation.852,00 DKK

Product photo: Retroreflective sensor with polarization filter OBR15M-R200-A5-IO-V1

Dimensions: Retroreflective sensor with polarization filter OBR15M-R200-A5-IO-V1

Connection Assignment: Retroreflective sensor with polarization filter OBR15M-R200-A5-IO-V1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
EN
ES
FR

Datasheet Classification Design / Simulation Approvals Software Related Products

Technical data of OBR15M-R200-A5-IO-V1

Retroreflective sensor with polarization filter

Effective detection range		0 ... 15 m
Reflector distance		0.02 ... 15 m
Threshold detection range		18.5 m
Reference target		H85-2 reflector
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Polarization filter		yes
Diameter of the light spot		approx. 520 mm at a distance of 15 m
Opening angle		2 °
Ambient light limit		EN 60947-5-2 : 60000 Lux

MTTF_d		724 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements		Light-on/dark-on changeover switch
Control elements		sensitivity adjustment

Operating voltage	U_B	10 ... 30 V 18 ... 30 V ( IO-Link )
Ripple		max. 10 %
No-load supply current	I₀	< 18 mA ( at 24 V )
Protection class		III

Interface type		IO-Link
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D Smart Sensor - SSP 2.4
Process data		Input 2 Bit - switching signal 1 Bit - stability alarm 1 Bit Output 2 Bit - Emitter deactivation 1 Bit - evaluation control function 1 Bit
Vendor ID		1 (0x0001)
Device ID		1118754 (0x111222)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
SIO mode support		yes
Compatible master port type		Class A

Switching type		The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: PNP normally open / dark-on, IO-Link /Q - Pin2: PNP normally closed / light-on
Signal output		2 PNP outputs, short-circuit-proof, reverse polarity protection, surge-proof
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	1000 Hz
Response time		0.5 ms

Communication interface		IEC 61131-9 / IO-Link V1.1.2
Product standard		EN 60947-5-2

UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

4-pin, M12 x 1 connector, 90° rotatable

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 37 g

Dimensions

Height		50.6 mm
Width		15 mm
Depth		41.7 mm

General Notes