RD0-TI-Ex8.PA.* Temperature Multi-InputFieldConnex® Fieldbus

Key Benefits at a Glance

For 8 temperature or analog sensors
Installation in Zone 1/Div. 1, intrinsically safe
Sensors in Zone 0/Div. 1
Connection to fieldbus acc. to FISCO or Entity
For PROFIBUS PA
DCS integration via GSD and FDT/DTM
Monitors sensor condition
For T/C, RTD 2-, 3-, 4-wire, voltage and resistance
Cold junction compensation
Removable terminals

Product photo: Temperature Multi-Input RD0-TI-Ex8.PA.*

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE

DE
EN

Datasheet Classification Product Documentation Design / Simulation Approvals Software Related Products

Technical data of RD0-TI-Ex8.PA.*

Temperature multi-input, electronic component for control cabinet installation

Design / Mounting		Cabinet installation
Installation in hazardous area		Zone 1 / Div. 1

Fieldbus type

PROFIBUS PA

Firmware update

via separate plug connection

FDE (Fault Disconnect Equipment)

6.7 mA

Polarity

not polarity sensitive

Rated voltage

U_N

9 ... 32 V

Rated current

I_N

max. 23 mA

PROFIBUS PA

Profile

3.02

LED PWR		green: on, bus voltage existent
LED COM ERR		red, continuous lightning: hardware error; red, flashing: no bus activities or bus fault; off: no error
LED CHANNEL ERROR		red: 2 Hz flashing: lead breakage, overrange; off: no error

Number		8
Sensor types		see table 1
Grounding		grounding of thermoelements possible
Error detection		lead breakage, wiring error, hardware device error
Common mode voltage		Input to Input 600 V_peak

Deviation

Cold junction compensation		± 0.5 °C (32.9 °F)
Resolution/accuracy		see table 2
Influence of ambient temperature		see table 3
Linearization		T/C input 0.1°C RTD input 0.03°C

Internal measurement cycle

for all sensor types max. 1 s

Fieldbus/inputs

safe galvanic isolation acc. to EN 60079-11, voltage peak value 375 V

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013

Galvanic isolation		EN 60079-11
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6

Ambient temperature		-40 ... 70 °C (-40 ... 158 °F) hazardous area -40 ... 85 °C (-40 ... 185 °F) safe area
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		≤ 95 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		5 g , 10 ... 150 Hz
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3

Connection type

plug-in terminals , spring terminal and screw terminal

Core cross section

Bus		up to 2.5 mm²
Inputs		up to 2.5 mm²

Housing material

Polycarbonate

Degree of protection

IP20

Mass

360 g

Mounting

DIN rail mounting

EU-type examination certificate

PTB 03 ATEX 2237

Marking

II 2 (1) G Ex ia [ia Ga] IIC T4 Gb , [exsign] II (1) G [Ex ia Ga] IIC , [exsign] II (1) D [Ex ia Da] IIIC , [exsign] II 3 G Ex ic IIC T4 Gc

Bus

FISCO see EC-Type Examination Certificate

Voltage U_i

24 V

Inputs

see EC-Type Examination Certificate

Certificate

PTB 03 ATEX 2238 X

Marking

II 3 G Ex nA IIC T4 Gc

Galvanic isolation

Bus		see Statement of Conformity
Input		see EC-Type Examination Certificate

Directive conformity

Directive 2014/34/EU

EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010

FM approval

FM certificate		FM18US0054X , FM18CA0027X
Control drawing		16-473FM-12A

IECEx approval

IECEx certificate		IECEx PTB 05.0001 IECEx PTB 05.0002X
IECEx marking		Ex ia [ia Ga] IIC T4 Gb [Ex ia Ga] IIC [Ex ia Da] IIIC Ex ic IIC T4 Gc Ex nA IIC T4 Gc

Supplementary information

EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

General Notes