HiCTB16-TRX-RAS-PL-AI16 Termination Board

Key Benefits at a Glance

System board for Schneider Electric, Tricon CX series by Triconex
For 32-channel (16+16) AI cards 3722X and 3723X
For 16 modules
Recommended modules: HiC2027 (AI), HiC2027ES (AI)
24 V DC supply
Hazardous area: pluggable screw terminals, blue
Non-hazardous area: screw terminals, black
Non-hazardous area: ELCO socket, 56-pin
Up to SIL 3 acc. to IEC/EN 61508

Product photo: Termination Board HiCTB16-TRX-RAS-PL-AI16

Wiring Diagram: Termination Board HiCTB16-TRX-RAS-PL-AI16

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

DE
EN
ES
FR
PL

Datasheet Function Classification Product Documentation Approvals Related Products

Technical data of HiCTB16-TRX-RAS-PL-AI16

Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3

Connection		X20: terminals 3, 5(+); 4, 6(-)
Nominal voltage		24 V DC , in consideration of rated voltage of used isolators
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		≤ 10 %
Fusing		4 A , in each case for 16 modules
Power dissipation		≤ 500 mW , without modules
Reverse polarity protection		yes

Supply

Redundancy available. The supply for the isolators is decoupled, monitored and fused.

Connection		X20: terminals 1(+), 2(-)
Output type		volt-free transistor output , not short-circuit protected , not overload protected
Rated voltage	U_r	30 V DC
Rated current	I_r	100 mA
Signal level		no fault: (external voltage) - 1 V max. for 100 mA (T_amb = 25 °C (77 °F)) power supply fault/module fault: blocked output (off-state current ≤ 10 µA)

Display elements

LED PWR1 (termination board power supply), green LED
LED PWR2 (termination board power supply), green LED

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013 (industrial locations)

Electromagnetic compatibility		EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description.
Degree of protection		IEC 60529:2001

Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Degree of protection

IP20

Connection

Field side		explosion hazardous area: pluggable screw terminals , blue
Control side		non-explosion hazardous area: output I: ELCO socket, 56-pin output II: screw terminals , black
Supply		pluggable screw terminals , black
Fault output		pluggable screw terminals , black

Core cross section

screw terminals 0.25 ... 2.5 mm² (24 ... 12 AWG)

Material

housing: polycarbonate, 10 % glass fiber reinforced

Mass

approx. 1000 g

Dimensions

266 x 200 x 163 mm (10.5 x 7.9 x 6.42 inch) (W x H x D) , depth including module assembly

Height		200 mm
Width		266 mm
Depth		163 mm

Mounting

on 35 mm DIN mounting rail acc. to EN 60715:2001

EU-type examination certificate

CESI 06 ATEX 022

Marking

II (1)G [Ex ia Ga] IIC
[exsign] II (1)D [Ex ia Da] IIIC
[exsign] I (M1) [Ex ia Ma] I

Non-hazardous area

Maximum safe voltage

250 V (Attention! U_m is no rated voltage.)

Galvanic isolation

Field circuit/control circuit

safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V

Directive conformity

Directive 2014/34/EU

EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000

UL approval

E106378

Control drawing

116-0327

IECEx approval

IECEx certificate		IECEx CES 06.0003
IECEx marking		[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Supplementary information

Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

General Notes