NCB2-12GM40-Z1 Inductive sensor

Key Benefits at a Glance

2 mm flush
2-wire DC

Product photo: Inductive sensor NCB2-12GM40-Z1

Dimensions: Inductive sensor NCB2-12GM40-Z1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV
ZH

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NCB2-12GM40-Z1

Switching function		Normally closed (NC)
Output type		Two-wire
Rated operating distance	s_n	2 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 1.62 mm
Actual operating distance	s_r	1.8 ... 2.2 mm typ.
Reduction factor r_Al		0.28
Reduction factor r_Cu		0.23
Reduction factor r₃₀₄		0.7
Output type		2-wire

Operating voltage	U_B	5 ... 60 V
Switching frequency	f	0 ... 800 Hz
Hysteresis	H	1 ... 10 % typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Short-circuit protection		pulsing
Voltage drop	U_d	≤ 5 V
Operating current	I_L	2 ... 100 mA
Lowest operating current	I_m	2 mA
Off-state current	I_r	0 ... 0.5 mA typ.
Switching state indicator		all direction LED, yellow

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Connection type

cable

Housing material

Stainless steel 1.4305 / AISI 303

Sensing face

PBT

Degree of protection

IP67

Cable

Wire end ferrules		yes
Cable diameter		3.5 mm ± 0.2 mm
Bending radius		> 10 x cable diameter
Material		PUR
Color		black
Number of cores		2
Core cross section		0.14 mm²
Length	L	2 m

Mass

53 g

Dimensions

Length		40 mm
Diameter		12 mm

General Notes