NBB1,5-5GM25-E1 Inductive sensor

Key Benefits at a Glance

Basic series

Product photo: Inductive sensor NBB1,5-5GM25-E1

Dimensions: Inductive sensor NBB1,5-5GM25-E1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals Related Products

Technical data of NBB1,5-5GM25-E1

Switching function		Normally closed (NC)
Output type		NPN
Rated operating distance	s_n	1.5 mm
Installation		flush
Output polarity		DC
Assured operating distance	s_a	0 ... 1.215 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.34
Reduction factor r₃₀₄		0.78
Reduction factor r_Brass		0.51
Output type		3-wire

Operating voltage	U_B	10 ... 30 V
Switching frequency	f	0 ... 3000 Hz
Hysteresis	H	1 ... 15 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		yes
Voltage drop	U_d	≤ 3 V
Operating current	I_L	0 ... 200 mA
Off-state current	I_r	0 ... 0.1 mA typ. 0.1 µA at 25 °C
No-load supply current	I₀	≤ 10 mA
Switching state indicator		LED, yellow

Standard conformity

Standards

EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Connection type

cable

Housing material

Stainless steel 1.4305 / AISI 303

Sensing face

POM

Degree of protection

IP67

Cable

Wire end ferrules		yes
Cable diameter		3 mm ± 0.2 mm
Bending radius		> 10 x cable diameter
Material		PVC
Color		grey
Number of cores		3
Core cross section		0.14 mm²
Length	L	2 m

Dimensions

Length		25 mm
Diameter		5 mm

General Notes