NJ2-N-H42 Inductive sensor

Key Benefits at a Glance

Comfort series
2 mm flush
Compression proof up to 350 bar, dynamic on active surface

Product photo: Inductive sensor NJ2-N-H42

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Approvals

Technical data of NJ2-N-H42

Switching function		Normally closed (NC)
Output type		NAMUR
Rated operating distance	s_n	1.5 mm
Installation		flush
Assured operating distance	s_a	0 ... 1.22 mm
Reduction factor r_Al		0
Reduction factor r_Cu		0
Reduction factor r₃₀₄		0.55
Output type		2-wire

Nominal voltage

U_o

8 V

Switching frequency

f

0 ... 400 Hz

Hysteresis

H

typ. 5 %

Current consumption

Measuring plate not detected		min. 3 mA
Measuring plate detected		≤ 1 mA

Standard conformity

NAMUR		EN 60947-5-6:2000 IEC 60947-5-6:1999
Standards		EN IEC 60947-5-2

UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature

-25 ... 100 °C (-13 ... 212 °F)

Connection type

connector, ZH 630 603 00
Socket, ZH 632 603 00

Housing material

Stainless steel 1.4305 / AISI 303

Sensing face

Ceramic

Degree of protection

IP50

Mass

167 g

Dimensions

Length		50 mm
Diameter		18 mm

General Notes