Single head system, IO-Link interface for service and process data, Programmable via DTM with PACTWARE, Continuous distance value via IO-Link process data, Series: -F77, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Interface type: IO-Link (via C/Q = Pin 4), Output type: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 Vfa
Single head system, IO-Link interface for service and process data, Programmable via DTM with PACTWARE, Continuous distance value via IO-Link process data, Series: -F77, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Interface type: IO-Link (via C/Q = Pin 4), Output type: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 Vfa
UC18GS series ultrasonic sensors reliably detect the container level of liquids and granules, regardless of their color and other optical properties. Learn more about the UC18GS ultrasonic sensor seri detected in the measuring range. Technical Features: Measuring range up to 1000 mm Very small dead bands of 30 mm resp. 70 mm Interfaces: IO-Link 1.1, infrared interface IrDA Output types: 2x push-pull switching output or 1x push-pull switching output and 1x analog output (current/voltage) Ambient temperature: –25 to +70 °C Degree of protection: IP67 The sound beam of the UC18GS series ultrasonic sensors is individually configurable. The Benefits The sensor has an IO-Link interface and can be
Switching sensors with an R100-series measurement core are perfectly suited to detect two different stacking heights. Read in this application report how the photoelectric sensors allows continuous op, the measurement core can be integrated even in the smallest sensor. Two switching outputs, independent switch points, a variety of operating modes , and IO-Link ensure maximum flexibility . R100 Series at a Glance Optimizing processes, increasing efficiency—with versatile, adjustable sensors Two sensors in one—sensors with two switch points due to Multi Pixel Technology Reliable, precise, and noise-immune distance measurement Maximum flexibility with IO-Link Reduced costs in purchasing and logistics
IO-Link enables consistent, bidirectional communication between the control system and the lowest sensor/actuator level via standard, unshielded three-core cable. Read more about IO-Link ...IO-Link—The Intelligent Communication Technology Sensors and actuators are rapidly evolving. They are no longer just transferring data via standard binary and analog interfaces, but are also becoming more and more intelligent because of incorporated microprocessors . These lay the groundwork for additional device intelligence that transcends the actual sensor function. In addition to transferring measured values and switching signals, IO-Link sensors can store parameters and deliver additional information on
This glossary gives you an overview of the most important terms and their meanings used in connection with IO-Link ...IO-Link Glossary COM Describes an operation mode, in which messages are transfered via a IO-Link communication between a device and a master and represents one of the three possible SDCI communication modes "COM1", "COM2" or "COM3". SDCI communication mode Fundamental IO-Link technology. A digital interface that enables communication from point to point. Device type manager Device driver component for a device in an FDT environment. A DTM can represent the functionality of a device via a
Pepperl+Fuchs offers a wide range of industrial technologies to support your factory automation applications... applications. IO-Link—The Intelligent Communication Technology IO-Link is an internationally standardized, cross-vendor IO technology that enables bidirectional communication from the control system to the sensor/actuator level ... Ultrasonic Technology
IO-Link masters with multiple ports are often used for applications in which several devices are to be connected to one industrial Ethernet block. For integrating discrete standard sensors into the intelligent network, I/O hubs are used. Learn more …I/O Hubs IO-Link masters with multiple ports are often used for applications in which several devices are to be connected to one industrial Ethernet block . If users want to integrate discrete standard sensors into the intelligent network, they can use so-called I/O hubs . This comparatively inexpensive solution allows users to connect several standard sensors at once to an I/O hub . Due to the integrated I/O-Link interface , they can be connected to the IO-Link master so that only a single port
With the acquisition of the business of Comtrol Corporation, a US-based pioneer in industrial Ethernet communication and IO-Link gateways, Pepperl+Fuchs is completing its portfolio of future-oriented Industry 4.0 solutions for cloud-basedPepperl+Fuchs Comtrol | Complete Infrastructure for IoT Applications Seamless Communication Product Overview IO-Link Master RocketLinx® Switches Serial Gateways Complete Infrastructure Contact Seamless Communication at Every Level Complete Infrastructure for Cloud-Based IoT Applications Complete Infrastructure for IoT Applications With the acquisition of the business of Comtrol Corporation, a US-based pioneer in industrial Ethernet communication and IO-Link Masters , Pepperl+Fuchs is enhancing its
Filling lines in the beverage industry operate at high throughput rates and are therefore highly automated. UC18GS series ultrasonic sensors reliably detect the presence of bottles in the end position output configuration as well as the sound beam radius can be set with push buttons on the device. The IO-Link interface allows comprehensive parameterization via the controller without physical access to the sensor. This not only makes commissioning particularly easy , but also enables fast product changeover without time-consuming re-parameterization. Even the complete individualization of products—automated production in batch size 1—is possible via IO-Link. Technical Features: Measuring range up to
Unexpected machine downtime can cause great financial damage. The new absolute rotary encoder with IO-Link interface from Pepperl+Fuchs supports you in increasing plant transparency and using potential savings. Learn more about its features ...What's New? View All News 2024 뉴스 자료실 News Archive 2023 모든 뉴스보기 2022 뉴스보기 2021 모든 뉴스보기 2020 뉴스 자료실 2019 뉴스 자료실 2018 국제 전시회 트레이닝+세미나 보도 자료 미디어 센터 Press Releases 2023 Press Releases 2022 Press Releases 2021 Press Releases 2020 한국 전시회 IO-Link Rotary Encoder—Simplified Condition Monitoring and Increased Plant Availability 2020-11-03 IO-Link rotary encoder with solid shaft Unexpected machine downtime can be costly. This means short response times are required to ensure high plant availability in the