Serviceline Industrial Sensors
Serviceline Explosion Protection

Absolute encoders ENA58IL-R***-J1939

ENA58IL-R***-J1939
  • Recessed hollow shaft
  • Up to 31 bit overall resolution
  • CAN bus with SAE J1939 protocol
  • Free of wear magnetic sampling
  • High resolution and accuracy

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Ladda ned datablad som PDF::


Utdrag ur datablad: Tekniska data för  ENA58IL-R***-J1939

General specifications
Detection typemagnetic sampling
Device typeAbsolute encoders
Linearity error≤ ± 0.1 °
UL File NumberE223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product.
Functional safety related parameters
MTTFd480 a at 40 °C
Mission Time (TM)20 a
L105 E+8 revolutions at 24/198 N axial/radial shaft load
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED greenOperating mode
LED redwrong baud rate
Electrical specifications
Operating voltage9 ... 30 V DC (with galvanic isolation)
Power consumption≤ 1.2 W
Time delay before availability< 250 ms
Output codebinary code
Code course (counting direction)adjustable
Interface
Interface typeJ1939
Resolution
Single turnup to 16 Bit
Multiturnup to 15 Bit
Overall resolutionup to 31 Bit
Transfer ratemin. 20 kBit/s , max. 1 MBit/s
Cycle time≥ 1 ms
Standard conformityISO 11898
Connection
ConnectorM12 connector, 5 pin
Cable∅6 mm, 4 x 2 x 0.14 mm2
Standard conformity
Degree of protectionDIN EN 60529, IP65 or IP67
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 200 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 20 g, 10 ... 1000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product.
Ambient conditions
Operating temperaturecable, flexing: -5 ... 70 °C (23 ... 158 °F),
cable, fixed: -30 ... 70 °C (-22 ... 158 °F)
connector models: -40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity98 % , no moisture condensation
Mechanical specifications
Material
Housingnickel-plated steel , painted
FlangeAluminum
ShaftStainless steel
Massapprox. 300 g
Rotational speedmax. 12000 min -1
Moment of inertia50 gcm2
Starting torque< 5 Ncm
Shaft load
Axial24 N
Radial198 N
Angle offset± 0.9 °
Axial offset± 0.3 mm static
Radial offset± 0.5 mm static

Documents: ENA58IL-R***-J1939

ManualsLanguageFile TypeFile Size
Encoders with J1939 InterfaceENGPDF2622 KB
Instruction leaflets
Instruction leaflet / Beipackzettel ALLPDF1165 KB

CAD+CAE: ENA58IL-R***-J1939

CADFile TypeFile Size
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ENA58IL-R***-J1939

Statements of complianceCert No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3270APDF86 KB
Certificates
CA UL General PurposeE223176LINK---
US UL General PurposeE223176LINK---

Associated Products: ENA58IL-R***-J1939

Accessories
Single-ended female cordset, M12, 4-pin, shielded PUR cable, outdoorfa
Single-ended female cordset, M12, 4-pin, shielded PUR cable, outdoorfa
Single-ended female cordset, M12, 4-pin, shielded PUR cable, outdoorfa