Hinweis: Alle produktbezogenen Dokumente, wie Zertifikate, Konformitäts- oder Herstellererklärungen, die unter der Firmierung Pepperl+Fuchs GmbH oder Pepperl+Fuchs AG herausgegeben wurden, gelten auch für die Pepperl+Fuchs SE.
Vollständiges Datenblatt als PDF herunterladen:
Produktbeschreibung |
---|
6100 series Ex pxb motor purge and pressurization system control unit |
General specifications | ||
---|---|---|
Operating mode | manual, semi-automatic, or fully automatic - programmable | |
Series | 6100 Series | |
Number of volume exchanges | 4 to 19 | |
Hazardous environment | gas | |
Supply | ||
Rated voltage | 100 ... 250 V AC, 50 ... 60 Hz / 0.2 A 20 ... 30 V DC / 0.6 A |
|
Electrical specifications | ||
Connection | ||
Power | Ex e terminal blocks | |
Connection | 6000-ISB DIN-mounted terminal | |
Input | ||
Input type | IS 1: Dedicated for 6000-TEMP-01 (optional) IS 2: Dedicated for 6100-MP-LPP Input 1: SRM, discrete input, Intrinsically Safe Input 2: SRM, discrete input, Intrinsically Safe Input 3: Dedicated for EPV-6100-MP, Flow Signal Input 4: Dedicated high pressure switch, Max Pressure Signal (optional) |
|
Output | ||
Output I | AUX 1 | |
Output type | Dry contacts, SPDT | |
Inrush current | 5 A | |
Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
Output II | AUX 2 | |
Output type | Dry contacts, SPDT | |
Inrush current | 5 A | |
Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
Output III | enclosure 1 and 2 | |
Output type | Dry contacts (2) SPST, NO | |
Inrush current | 72 A | |
Contact loading | 8 A at 240 V AC / 120 V AC resistive load 8 A at 24 V DC |
|
Indicators/settings | ||
LED indication | Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - fault |
|
Pneumatic parameters | ||
Protective gas supply | regulated and filtered air or inert gas | |
Pressure requirement | regulated side: 1.4 ... 8.3 bar [20 ... 120 psig) unregulated side: 4.1 ... 8.3 bar [65 ... 120 psig) |
|
Safe pressure | 0.62 mbar [0.25 in wc / 6.4 mm wc] minimum for 6100-MP-LPP-* | |
Purge flow and enclosure pressure rate | 2000 l/m ... 14000 l/m see EPV-6100 datasheet for flow rate steps |
|
Valve flows | pressurization valve: manual gate valve purging valve: pilot drive angle seat valve pilot valve: intrinsically safe solenoid valve |
|
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 | |
RoHS | ||
Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
Ambient conditions | ||
Ambient temperature | 0 ... 60 °C (32 ... 140 °F) Standard version -20 ... 60 °C (-4 ... 140 °F) Low temp version, no regulator version |
|
Storage temperature | 0 ... 80 °C (32 ... 176 °F) Standard version -20 ... 80 °C (-4 ... 176 °F) Low temp version, no regulator version |
|
Relative humidity | 5 ... 95 %, noncondensing | |
Vibration resistance | 1 g , 5 ... 100 Hz , all axes | |
Impact resistance | 30g, 11 ms, all axes | |
Mechanical specifications | ||
Connection type | Terminals | |
Core cross section | see manual | |
Degree of protection | IP66 | |
Cable entry | 3 x M16 holes, plugs that are included are not hazardous-location rated 4 x M20 holes, plugs that are included are not hazardous-location rated |
|
Material | inlet and outlet: 1¼ inch NPTF, 316 stainless steel internal piping: copper bulkhead fittings: 316 stainless steel (no regulator model) gate valve: bronze, Grafoil seals purging valve: 316 stainless steel, PTFE seals solenoid valve: brass housing: 316L stainless steel regulator: zinc (standard temp); aluminum (low temp); N/A (no regulator) filter (pneumatic): aluminum tubing (pneumatic): nylon fittings (pneumatic): nickel-plated brass |
|
Mass | 47.2 kg (104 lb) | |
Dimensions | 216 mm x 508 mm x 770 mm (8.5 in x 20 in x 30.3 in) | |
Height | 762 mm | |
Width | 558 mm | |
Depth | 213 mm | |
Data for application in connection with hazardous areas | ||
Certificate | CML 19 ATEX 1425X | |
Marking | II 2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb | |
Directive conformity | ||
Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012 |
|
International approvals | ||
IECEx approval | IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
General information | ||
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
System | Classcode |
---|---|
ECLASS 13.0 | 27180591 |
ECLASS 12.0 | 27180591 |
ECLASS 11.0 | 27180591 |
ECLASS 10.0.1 | 27293101 |
ECLASS 9.0 | 27293101 |
ECLASS 8.0 | 27293101 |
ECLASS 5.1 | 40050501 |
ETIM 9.0 | EC000243 |
ETIM 8.0 | EC000243 |
ETIM 7.0 | EC000243 |
ETIM 6.0 | EC000243 |
ETIM 5.0 | EC000243 |
UNSPSC 12.1 | 39121303 |
Das Motor-Überdruckkapselungs-/Spülsystem Bebco EPS® 6100 der Serie Ex pxb, Zone 1, besteht aus folgenden Komponenten in einem IP66-Gehäuse: Steuereinheit und Benutzerschnittstelle, eigensichere und Stromversorgungsklemmen, manuelles Druckventil und elektropneumatisches Ventil für automatische Spülung und Leckageausgleich.
Die konfigurierbare Steuereinheit verfügt über einen Temperatur- und Druckausgleich, einen zusätzlichen Ausgang für Steuerung oder Alarm, zwei wählbare eigensichere Eingänge für verschiedene Aktionen und bis zu drei Temperatursensoreingänge, die verschiedene Punkte in einem Motorgehäuse überwachen können. Die eigensichere Benutzerschnittstelle kann auch in einem separaten Gehäuse in der Nähe des Bedienpersonals installiert werden, um einen schnellen Zugriff und eine einfache Systemüberwachung zu ermöglichen. Das Überdruckkapselungs-/Spülsystem 6100 kann auch zum Spülen und Schützen großer Gehäuse verwendet werden, die einen hohen Mengenstrom erfordern.
Zu ihrer Sprachauswahl gibt es leider keine Dokumente. Bitte wählen Sie eine andere Sprache aus. |
Product information | Sprache | Dateityp | Dateigröße |
---|---|---|---|
Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization" | ENG | 3860 KB | |
Safety and Security Documentation | |||
Manual | ENG | 6146 KB | |
Betriebsanleitung | GER | 233 KB | |
Manuals | |||
Manual | ENG | 4787 KB |
Certificates | Kennung | Sprache | Dateityp | Dateigröße |
---|---|---|---|---|
Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
UK-Type Examination Certificate | CML 21UKEX1380X | ALL | 127 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0D7B | ALL | 163 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F6 | ALL | 160 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|