SMART Current Driver HiD2038
- 2-channel isolated barrier
- 24 V DC supply (bus powered)
- Current output up to 750 Ω load
- SMART I/P and valve positioners
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Caractéristiques techniques HiD2038
| General specifications | ||
|---|---|---|
| Signal type | Analog output | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) | |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board | |
| Rated current | 40 mA at 24 V, 20 mA output (per channel) | |
| Power dissipation | 0.85 W at 24 V (per channel) | |
| Input | ||
| Connection side | control side | |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) | |
| Input current | 4 ... 20 mA , reverse polarity protected | |
| Signal level | input voltage drop < 4 V with field wiring intact input current < 1.2 mA with field wiring open |
|
| Output | ||
| Connection side | field side | |
| Connection | SL2: 5a(+), 5b(-); 1a(+), 1b(-) | |
| Load | 0 ... 750 Ω | |
| Output signal | 4 ... 20 mA | |
| Ripple | 15 mV eff | |
| Response time | 50 ms , 10 ... 90 % step change | |
| Line fault detection | breakage, load > 100 kΩ, short-circuit, load < 70 Ω | |
| Fault indication output | ||
| Connection | SL1: 6b | |
| Output type | open collector transistor (internal fault bus) | |
| Transfer characteristics | ||
| Accuracy | < ± 0.1 % of full-scale value | |
| Influence of temperature | < ± 0.01 %/K | |
| Frequency range | 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz) for use with SMART positioners using HART protocol | |
| Influence of load | < ± 0.1 % of full-scale value from 0 ... 750 Ω | |
| Linearity | < ± 0.1 % of full-scale value | |
| Galvanic isolation | ||
| Input/power supply | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
| Input/input | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
| Indicators/settings | ||
| Display elements | LEDs | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
|
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 5 ... 90 %, non-condensing up to 35 °C (95 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 140 g | |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) | |
| Height | 106 mm | |
| Width | 18 mm | |
| Length | 128 mm | |
| Mounting | on termination board | |
| Coding | pin 1 and 3 trimmed For further information see system description. |
|
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CESI 02 ATEX 086 | |
| Marking |  II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC |
|
| Output | Ex ia, Ex iaD | |
| Voltage | 26 V | |
| Current | 93 mA | |
| Power | 605 mW | |
| Supply | ||
| Maximum safe voltage | 250 V AC (Attention! Um is no rated voltage.) | |
| Certificate | PF 11 CERT 2109 X | |
| Marking | II 3G Ex nA IIC T4 Gc [device in zone 2] |
|
| Galvanic isolation | ||
| Input/Output | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V | |
| Output/power supply | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V | |
| Output/Output | safe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| CSA approval | ||
| Control drawing | 366-005CS-12B (cCSAus) | |
| IECEx approval | IECEx TUN 04.0012 | |
| Approved for | [Ex ia] IIC | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210120 |
| ECLASS 12.0 | 27210120 |
| ECLASS 11.0 | 27210120 |
| ECLASS 10.0.1 | 27210120 |
| ECLASS 9.0 | 27210120 |
| ECLASS 8.0 | 27210120 |
| ECLASS 5.1 | 27210120 |
| ETIM 9.0 | EC002653 |
| ETIM 8.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| ETIM 6.0 | EC002653 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details: HiD2038
Datasheet: HiD2038
| Datasheet | Type de fichier | Taille |
|---|---|---|
| Datasheet HiD2038 | 297 KB | |
| Datenblatt HiD2038 | 298 KB |
Documents: HiD2038
| Manuals | Type de fichier | Taille |
|---|---|---|
| Manual | 199 KB | |
| System Manual | 5438 KB | |
| Systemhandbuch | 5450 KB | |
| Instruction manuals | ||
| Инструкции | 169 KB | |
| Instruction manual / Betriebsanleitung | 320 KB | |
| Návod k poużití | 163 KB | |
| Instruktions manual | 163 KB | |
| Instruction manual | 168 KB | |
| Kasutusjuhend | 159 KB | |
| Käyttöohje | 158 KB | |
| Manuel d'instructions | 165 KB | |
| Betriebsanleitung | 170 KB | |
| Οδηγίες χρήσης | 173 KB | |
| Handleiding | 164 KB | |
| Instruction manual / Betriebsanleitung | 162 KB | |
| Használati útmutató | 164 KB | |
| Manuale di istruzioni | 163 KB | |
| Lietošanas pamācība | 161 KB | |
| Instrukciju vadovas | 162 KB | |
| Instrukcja obsługi | 166 KB | |
| Manual de instruções | 164 KB | |
| Manual de utilizare | 164 KB | |
| Návod na poużitie | 163 KB | |
| Navodila za uporabo | 161 KB | |
| Manual de instrucciones | 164 KB | |
| Manual | 160 KB |
CAD+CAE: HiD2038
| CAD | Type de fichier | Taille |
|---|---|---|
| CAD 2-D / CAD 2-D | ZIP | 16364 KB |
| EPLAN | ||
| EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA) | ZIP | 3536 KB |
Approvals+Certificates: HiD2038
| Certificates | Type de fichier | Taille |
|---|---|---|
| Canada, USA CSA | 136 KB | |
| Europe CESI ATEX Category (1) D ATEX Category (1) G | 3887 KB | |
| South Africa MASC | 662 KB | |
| TUV Nord IECEx Certificate of Conformity | LINK | --- |
| exida Functional Safety Assessment | 514 KB | |
| Control Drawings | ||
| Control drawing CSA / Control drawing CSA | 98 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 49 KB |
- Demandez à un Expert
- Demande pour une référence équivalente
- Suivi de votre commande en cours
- Nouveautés
- Service Level Agreements for ecom instruments
- Où commander
- Sélection de documentations
- Technologies
- Solutions systèmes de contrôle
- Recherche de documents techniques, catalogues ou brochures
- Articles de presse
- Salons
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
© 2024 Tous droits réservés.
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.