Safety light grid with integrated control unit SLPC65-4
- Sensing range up to 65 m
- 4-radial design
- Beam spacing 300 mm
- Self-monitoring (type 4 according to IEC/EN 61496-1)
- Red transmission light
- Usable with or without start/restart disable
- Integrated relay monitor
- 7-segment diagnostic display
- Integrated function display
- Operating reserve indication
- OSSD outputs as semiconductor or relay outputs
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques SLPC65-4
| System components | ||
|---|---|---|
| Emitter | SLP65-4-T | |
| Receiver | SLPC65-4-R | |
| General specifications | ||
| Effective detection range | 12 ... 65 m | |
| Light source | LED | |
| Light type | modulated visible red light | |
| Tests | IEC/EN 61496 | |
| Safety type according to IEC/EN 61496 | 4 | |
| Marking | CE | |
| Target size | static: 32 mm dynamic: 50 mm (at v = 1.6 m/s of the obstacle) |
|
| Beam spacing | 300 mm | |
| Number of beams | 4 | |
| Operating mode | Start/restart disable, relay monitor, | |
| Opening angle | < 5 ° | |
| Functional safety related parameters | ||
| Performance level (PL) | PL e | |
| Category | Cat. 4 | |
| Mission Time (TM) | 20 a | |
| PFHd | 3.54 E-9 | |
| Type | 4 | |
| Indicators/operating means | ||
| Diagnostics indicator | 7-segment display | |
| Function indicator | LED red: per receiver channel off: interruption flashes: receiver continuously on: reception with sufficient stability control on the front plate: LED red: OSSD off LED green: OSSD on |
|
| Stability alarm indicator | LED red next to receiver flashes | |
| Control elements | 10 DIP switch in receiver terminal compartment | |
| Electrical specifications | ||
| Operating voltage | 24 V DC -15% / +25% , galvanically isolated | |
| No-load supply current | max. 250 mA | |
| Protection class | III , IEC 61140 | |
| Input | ||
| Activation current | approx. 10 mA | |
| Activation time | 0.03 ... 1 s | |
| Test input | Reset-input for system test | |
| Function input | Relay monitor, start release | |
| Output | ||
| Stability alarm output | 1 PNP, +UB -2 V, max. 300 mA | |
| Safety output | 2 separated fail safe semiconductor outputs | |
| Signal output | 1 PNP each, max. 300 mA for start readiness, OSSD on, OSSD off, muting lamp | |
| Switching voltage | Operating voltage -2 V | |
| Switching current | max. 0.5 A | |
| Response time | 20 ms | |
| Conformity | ||
| Functional safety | ISO 13849-1 |
|
| Product standard | EN 61496-1 ; IEC 61496-2 | |
| Approvals and certificates | ||
| CE conformity | CE | |
| Approvals | TÜV SÜD | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | max. 95 %, not condensing | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitter |
|
| Connection options | Further electrical connection options on request: Connector DIN 43 651 Hirschmann, emitter: 6-pin+PE, receiver: 11-pin+PE |
|
| Material | ||
| Housing | extruded aluminum profile, RAL 1021 (yellow) coated | |
| Optical face | Plastic pane | |
| Mass | Per 3700 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272703 |
| ECLASS 12.0 | 27272703 |
| ECLASS 11.0 | 27272703 |
| ECLASS 10.0.1 | 27272703 |
| ECLASS 9.0 | 27272703 |
| ECLASS 8.0 | 27272703 |
| ECLASS 5.1 | 27272703 |
| ETIM 9.0 | EC002549 |
| ETIM 8.0 | EC002549 |
| ETIM 7.0 | EC002549 |
| ETIM 6.0 | EC002549 |
| ETIM 5.0 | EC002549 |
| UNSPSC 12.1 | 46171620 |
Details: SLPC65-4
Product Documentation: SLPC65-4
| Safety and Security Documentation | Langue | Type de fichier | Taille |
|---|---|---|---|
| Instruction Manual Safety light grid SLP/SLPC SLP/SLPCM | ENG | 1421 KB |
Design / Simulation: SLPC65-4
| CAD | Langue | Type de fichier | Taille |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 138 KB |
| CAD 3-D additional / CAD 3-D additional | ALL | STP | 168 KB |
Approvals: SLPC65-4
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| /cert/cert1317d.pdf | Z10 020068 0081 | ALL | 123 KB | |
| /cert/cert1511b.pdf | U8V 020068 0085 | ALL | 205 KB |
Software: SLPC65-4
| Software Tools | Parution | Type de fichier | Taille |
|---|---|---|---|
| SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren | ZIP | 131 KB |
Plusieurs centaines de produits ayant fait l'objet d'une évaluation SIL/PL, des outils gratuits et des brochures au même endroit : le « Centre de sécurité fonctionnelle » est votre point de départ lorsque vous devez mettre en œuvre des fonctions de sécurité.
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.