Serviceline Industrial Sensors
Support en ligne pour la protection contre le risque d’explosion

RFID read/write device IQH1-F198-V1

IQH1-F198-V1
  • Operating frequency 13.56 MHz
  • Conforms to ISO 15693
  • Suitable for FRAM transponder
  • Particularly flat construction
  • Connection cable with V1 plug (M12 x 1)
  • Degree of protection IP67
  • For connection to IDENTControl evaluation unit

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF ::


Caractéristiques techniques  IQH1-F198-V1

Description produit
HF RFID read/write device, ISO 15693, for IDENTControl
General specifications
Operating frequency13.56 MHz
Transfer rate26 kBit/s
Sensing range
Read distance0 ... 150 mm
Write distance0 ... 150 mm
Widthmax. 145 mm
UL File NumberE87056
MTBF365 a (Operation at +40 °C)
Indicators/operating means
LED green/yellowgreen: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Electrical specifications
Power consumption≤ 1.3 W
Supplyfrom the IDENTControl
Directive conformity
Radio equipment
Directive 2014/53/EUEN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Standard conformity
Degree of protectionEN 60529
RFIDISO/IEC 15693-2
ISO/IEC 15693-3
ISO/IEC 18000-3
Approvals and certificates
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
MIC approvalAC-21096
Radio approvalUSA: FCC IREIQH1F198V1
Canada: IC 7037A-IQH1F198V1
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67
Connectionconnector M12 x 1
Material
HousingPA 6.6
Encapsulation compoundWEVO 403FL/300
Installation
Distance between two headsMultiplex on: ≥ 100 mm
Multiplex off: ≥ 150 mm
Massapprox. 200 g
Dimensions
Height12 mm
Width175 mm
Length190.5 mm
Cable length20 cm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IQH1-F198-V1

Informative Literature: IQH1-F198-V1

Language Selection:
LiteratureLangueType de fichierTaille
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB
Application Report - Tracking Materials on SpoolsENGPDF1298 KB

Design / Simulation: IQH1-F198-V1

Language Selection:
CADLangueType de fichierTaille
CAD 3-D / CAD 3-DALLSTP2049 KB
CAD Portal / CAD PortalALLLINK---

Approvals: IQH1-F198-V1

Language Selection:
CertificatesIdentificationLangueType de fichierTaille
Canada Radio Approval7037A-IQH1F198V1ALLPDF1829 KB
Canada, USA ULCoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0ALLPDF561 KB
Japan Radio ApprovalCERT-6239ALLPDF216 KB
USA FCC ApprovalIREIQH1F198V1ALLPDF127 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2620CALLPDF109 KB
Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung   ALLPDF61 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-7040ALLPDF107 KB
Australia Radio ApprovalCERT-4490ALLPDF60 KB

Produits associés : IQH1-F198-V1

Accessories

IDENTControl control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa

Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485fa

IDENTControl Compact RFID evaluation unit with interface for PROFIBUS DPfa

IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa

IDENTControl Compact RFID evaluation unit with EtherCAT interfacefa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Data carrierfa

Data carrierfa

Data carrierfa

Data carrierfa
Control interface unit IDENTControl with PROFIBUS DP interfacefa
Data carrierfa