Stopping plug for unused cable entries, High impact-resistant polyamide material, Ex eb and Ex tb certified, Suitable for operation in Zone 1, Zone 2, Zone 21 and Zone 22, Full impact resistance of 7 J according to IEC/EN 60079-0 for the full range without limitations, Ambient temperature: chloroprene seal: -40 ... 70 °C (-40 ... 158 °F) silicone seal: -60 ... 70 °C (-76 ... 158 °F), Thread size (TD): see data table, Stopping plug: high impact-resistant polyamidepa
Enclosure Stainless Steel, Ex e Component Approved
Stainless Steel enclosure, Brushed enclosure, IP66, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Ex eb and Ex tb certified, Suitable for operation in Class I, II Division 2, Suitable for operation in Class I Zone 2, Class II Zone 22, 32 enclosure size options, Return Flange Sealing provides Drain Channel, Option for vertical or horizontal mounting provides high flexibility, Customizable configuration of gland plates, ground bolt and hinges as per specificationpa
Control Stations Ex e, Stainless Steel, cover-mounted contact modules
Stainless Steel enclosure, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Ex db eb, Ex ib and Ex tb certified, Up to 102 operators per control station, 5 enclosure size options, Return Flange Sealing provides Drain Channel, Customizable configuration of operators, cable entry quantities and cable gland types as per specification, Customizable configuration of gland plates, ground bolt and hinges as per specification, Option for vertical or horizontal mounting provides high flexibilitypa
For use in North America, Stainless Steel enclosure, Certified for Class I, Division 2 hazardous areas, Up to 107 operators per control station, 10 enclosure size options, Return Flange Sealing provides Drain Channel, Customizable configuration of operators, cable entry quantities and cable gland types as per specification, Customizable configuration of gland plates, ground bolt and hinges as per specification, Option for vertical or horizontal mounting provides high flexibility, Up to 4 gland platespa
Terminal and Junction Boxes Ex e / Ex i with Return Flange, Stainless Steel
Stainless Steel enclosure, Installation in Zone 1, Zone 2, Zone 21 and Zone 22, Installation in Class I, II, Division 2, Ex eb, Ex ia and Ex tb certified, 16 enclosure size options, Return Flange Sealing provides Drain Channel, Customizable configuration of terminals, cable entries and cable gland types as per specification, Customizable configuration of gland plates, ground bolt and hinges as per specification, Option for vertical or horizontal mounting provides high flexibility, Up to 4 gland platespa
暂不可售: Surge protection for 2 supply lines, Type 3 acc. to EN 61643-11, Nominal voltage 120 V AC, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 3 acc. to EN 61643-11:2013 class III acc. to IEC 61643-1:2011, Number of protected supply lines: 2pa
暂不可售: Protection module for 1 supply line, Type 2 acc. to EN 61643-11, Exchange device for surge protection barrier M-LB-*.275*.D, Easy replacement of protection modules wihtout tools, High discharge capacity, Module can be exchanged under voltage (hot swap), Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 1pa
暂不可售: 4-channel, On/Off delay, Mounting in Zone 2, Class I/Div.2 or in the safe area, Positive or negative logic selectable, Explosion protection: Ex nA nCpa